[duxuser] Re: Too large a margin always on the right side of braille page
- From: "Janet Reynolds" <JReynolds@xxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Wed, 26 Jan 2011 14:42:07 +1300
Hi Paul
I'm interested to know if George's suggestion helped. We also have a
Juliet Pro which was donated to us, and I have been unable to get a
decent right margin with a 40 character braille line. For some odd
reason the Juliet Pro has two fewer cells available than the standard
Juliet, so if you increase the left margin by 2 you end up with only 38
cells.
Janet
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On Behalf Of George Bell
Sent: Tuesday, 21 December 2010 4:57 a.m.
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Too large a margin always on the right side of
braille page
Hi Paul,
At a very wild guess, I'd suspect that your DBT's Global: Embosser
Setup is configured in such a way that Escape Codes are not being
sent to the embosser.
Can you go to DBT's Global Menu and Select Embosser Setup? Highlight
the embosser, and select Modify. There are three tabs in the next
dialog - General, Device Settings and Advanced. Navigate to the
"Device Settings" tab, and see if the "Allow Escape Codes" box is
checked? Ideally it should be. Then DBT will tell the embosser what
to do when you change the left margin.
Now most important! Having changed the margin in Global Embosser
Setup, start a new document, which will ensure you start with the new
settings. Type and couple of lines, translate, and emboss, and see if
it has moved the left margin.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Paul Ajuwon
Sent: 18 December 2010 12:51
To: duxuser@xxxxxxxxxxxxx
Cc: ajuwon@xxxxxxxxxxxxx
Subject: [duxuser] Too large a margin always on the right side of
braille page
Good morning, folks:
My Julie Pro 60 embosser cannot be configured to give more space to
the left
to allow for better binding. Rather, regardless of margin set, the
empty
space to the right side of paper is always more than the left side,
and the
paper holder is to the extreme left.
I have intimated both Duxbury and Juliet Pro folks with this ongoing
problem. Neither could help!
Any idea? Thanks.
Paul
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
