[duxuser] Re: Too large a margin always on the right side of braille page
- From: "Paul Ajuwon" <ajuwon@xxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 25 Jan 2011 21:46:27 -0600
Janet:
After trying George's elaborate suggestions and contacting Duxbury Systems
in MA, I discovered that the problem is as a result of an annoying feature
of the hardware. I am told this brand of Juliet operates at a faster
production rate, which will always limit the right margin to 40. In other
words, the right margin cannot be increased beyond 40, and if you decrease
the left margin, you end up with fewer usable cells. In my candid opinion,
this is not a cool feature of the embosser.
Paul
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Janet Reynolds
Sent: Tuesday, January 25, 2011 7:42 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Too large a margin always on the right side of
braille page
Hi Paul
I'm interested to know if George's suggestion helped. We also have a Juliet
Pro which was donated to us, and I have been unable to get a decent right
margin with a 40 character braille line. For some odd reason the Juliet Pro
has two fewer cells available than the standard Juliet, so if you increase
the left margin by 2 you end up with only 38 cells.
Janet
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On Behalf Of George Bell
Sent: Tuesday, 21 December 2010 4:57 a.m.
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Too large a margin always on the right side of
braille page
Hi Paul,
At a very wild guess, I'd suspect that your DBT's Global: Embosser Setup is
configured in such a way that Escape Codes are not being sent to the
embosser.
Can you go to DBT's Global Menu and Select Embosser Setup? Highlight the
embosser, and select Modify. There are three tabs in the next dialog -
General, Device Settings and Advanced. Navigate to the "Device Settings"
tab, and see if the "Allow Escape Codes" box is checked? Ideally it should
be. Then DBT will tell the embosser what to do when you change the left
margin.
Now most important! Having changed the margin in Global Embosser Setup,
start a new document, which will ensure you start with the new settings.
Type and couple of lines, translate, and emboss, and see if it has moved the
left margin.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Paul Ajuwon
Sent: 18 December 2010 12:51
To: duxuser@xxxxxxxxxxxxx
Cc: ajuwon@xxxxxxxxxxxxx
Subject: [duxuser] Too large a margin always on the right side of braille
page
Good morning, folks:
My Julie Pro 60 embosser cannot be configured to give more space to the left
to allow for better binding. Rather, regardless of margin set, the empty
space to the right side of paper is always more than the left side, and the
paper holder is to the extreme left.
I have intimated both Duxbury and Juliet Pro folks with this ongoing
problem. Neither could help!
Any idea? Thanks.
Paul
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
