#8987: ps2: initial setup of command byte failed ----------------------------------+---------------------------------------- Reporter: x-ist | Owner: siarzhuk Type: bug | Status: new Priority: normal | Milestone: R1 Component: | Version: R1/Development Drivers/Keyboard/PS2 | Keywords: ps2 keyboard touchpad OHCI Resolution: | Blocking: Blocked By: | Platform: All Has a Patch: 0 | ----------------------------------+---------------------------------------- Comment (by x-ist): Just added another syslog with OHCI bus and bus_manager debug traces. Here's an abstract: {{{ KERN: usb stack 0: adding module busses/usb/ohci KERN: usb ohci: searching devices KERN: usb ohci: found device at IRQ 18 KERN: usb ohci -1: constructing new OHCI host controller driver KERN: usb ohci -1: iospace offset: 0xd0504000 KERN: add_memory_type_range(159, 0xd0504000, 0x1000, 0) KERN: usb ohci -1: mapped operational registers: 0x81771000 KERN: usb ohci -1: version 1.0, legacy support KERN: usb stack 0: allocating 256 bytes for USB OHCI Host Controller Communication Area KERN: usb stack 0: area = 160, size = 4096, log = 0x81772000, phy = 0x505a000 KERN: usb ohci -1: smm is in control of the host controller KERN: usb error ohci -1: smm does not respond. resetting... }}} Could it be that IRQ 18 was used by the ps2 interface previously and is then grabbed by OHCI? -- Ticket URL: <http://dev.haiku-os.org/ticket/8987#comment:7> Haiku <http://dev.haiku-os.org> Haiku - the operating system.