[ibis-macro] Re: Analog Buffer Model Inside DLL

  • From: Kumar Keshavan <ckumar@xxxxxxxxxxx>
  • To: "gedlund@xxxxxxxxxx" <gedlund@xxxxxxxxxx>, "ibis-macro@xxxxxxxxxxxxx" <ibis-macro@xxxxxxxxxxxxx>
  • Date: Wed, 12 Dec 2012 10:18:15 -0800

Why not? As long as the dll is isolated from the analog front end , the dll 
itself can be modeled any way you want


From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] 
On Behalf Of Gregory R Edlund
Sent: Wednesday, December 12, 2012 12:55 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Analog Buffer Model Inside DLL


What nasty things are likely to happen if someone puts the analog buffer model 
inside the DLL?  At the very least, the impulse response will be incorrect.

Are there any circumstances under which this can work correctly?

Greg Edlund
Senior Engineer
Signal Integrity and System Timing
IBM Systems & Technology Group
3605 Hwy. 52 N  Bldg 050-3
Rochester, MN 55901

Other related posts:

  1. Home
  2. ibis-macro
  3. Archive
  4. 12-2012