Not knowing the specifics of how this all works, shouldn't an eye center be located at the mean of the horizontal(time) and vertical(voltage) sampler probability distributions, since I assume that the computed sampler PDF has been included in the computation for the effective eye after sampling.
Muranyi, Arpad wrote:
Sorry for my poor problem statement... I mean the output of Rx (as it comes back from Rx GetWave), used together with the clock ticks from Rx GetWave to formulate the eye. Arpad ================================================ -----Original Message-----From: Todd Westerhoff [mailto:twesterh@xxxxxxxxxx] Sent: Tuesday, December 08, 2009 12:40 PMTo: Muranyi, Arpad Cc: IBIS-ATM Subject: Re: [ibis-macro] Eye mask question Arpad,Not meaning to be enigmatic here, but what signal(s) are you thinking get used to generate the eye diagram, and how?Todd. Todd Westerhoff VP, Software Products SiSoft 6 Clock Tower Place, Suite 250 Maynard, MA 01754 (978) 461-0449 x24 twesterh@xxxxxxxxxx www.sisoft.com Muranyi, Arpad wrote:Hello IBIS-AMI experts, This is a question regarding the analysis/evaluation of the results we get back from an AMI simulation. How does the user decide whether the eye is good or bad? Naturally we have this thing called eye mask (template) which we would all be able to drop into the eye without touching any of the waveforms. But where are we trying to position it? Anywhere it fits the best way? Or is it supposed to be positioned at a certain location? Thanks for any feedback in advance, Arpad ========================================================= --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe--------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe
-- Scott McMorrow Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 (401) 284-1827 Business (401) 284-1840 Fax http://www.teraspeed.com Teraspeed® is the registered service mark of Teraspeed Consulting Group LLC