[ibis-macro] Re: Tx_Jitter and Tx_DCD
- From: "Dai, Xingdong (Xingdong)" <Xingdong.Dai@xxxxxxx>
- To: "gedlund@xxxxxxxxxx" <gedlund@xxxxxxxxxx>, "ibis-macro@xxxxxxxxxxxxx" <ibis-macro@xxxxxxxxxxxxx>
- Date: Fri, 9 Aug 2013 10:47:24 -0400
Greg. The jitters and noise are applied by EDA tools post-simulation.
Thanks,
-Dai
From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx]
On Behalf Of Gregory R Edlund
Sent: Friday, August 09, 2013 10:28 AM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Tx_Jitter and Tx_DCD
I have a basic question about where Tx_Jitter and Tx_DCD are supposed to be
applied during simulation:
Is the EDA tool supposed to apply Tx_Jitter and Tx_DCD, or is that up to the
algorithmic model?
I was unable to find the answer in the following sections of IBIS 5.1. Maybe
it's in another section that I missed.
Section 10.2.3.2, Time Domain Simulation Reference Flow, page 161
Section 10.2.2, Time Domain Simulations, page 160
Section 10A, Reserved Parameters Reference, page 187
Greg Edlund
Senior Engineer
Signal Integrity and System Timing
IBM Systems & Technology Group
3605 Hwy. 52 N Bldg 050-3
Rochester, MN 55901
Other related posts:
