[python] Re: welding
- From: "Marc Huebner" <marchuebner@xxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Mon, 02 Jun 2008 15:11:48 +0200
Hi Ron
With the machine I welded a lot of 1mm (wall) tubes. In steel, stainless steel
and alu it's no problem. Up to 8mm material should be no problem, but of course
the TIG method is more used for fine work. Also to connect thin material with
thick is possible.
Marc
-------- Original-Nachricht --------
> Datum: Mon, 02 Jun 2008 12:39:01 +0200
> Von: Ronald Hongsermeier <rwhongser@xxxxxx>
> An: python@xxxxxxxxxxxxx
> Betreff: [python] Re: welding
> Hi Marc,
>
> What are the steel welding parameters of this machine? I.e., what is the
> thinnest and thickest material that you can weld with it?
>
> I think that for purposes of bike/recumbent welding the wall thickness
> necessary will probably be considerably smaller than the capacity of your
> machine.
>
> thx,
> ron
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: "Marc Huebner" <marchuebner@xxxxxx>
> > Gesendet: 02.06.08 11:38:37
> > An: python@xxxxxxxxxxxxx
> > Betreff: [python] welding
>
>
> > Hi all welders and non-welders!
> >
> > About 6 years ago I bought a used AC/DC TIG (WIG) welding machine. The
> price was at about 700 Euro. A new one is at about 3000...... .
> > AC/DC means, that you can weld steel and stainless steel with direct
> current (DC) and aluminum with alternating current (AC).
> > The big advantage of the TIG machine compared to MIG/MAG machines is
> that you don't have to add always material. It's possible to just melt two
> parts together.
> > For me it was worth to buy this machine, I'm very happy with it.
> > I'm not a friend of brazing when no pipe couplings (=capillary socket
> ??) are used. With brazing you spend a lot of time to make fit two parts
> together. With welding you can easy fill up gaps of 2mm!
> >
> > Happy building!
> >
> > Marc
> >
> >
> >
> >
> > --
> > Marc Hübner
> > Hauptstrasse 47
> > CH-4143 Dornach
> > 0041 61 701 25 14
> > marchuebner@xxxxxx
> > http://www.liegerad-tour.ch.vu/
> >
> > Psssst! Schon vom neuen GMX MultiMessenger gehört?
> > Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
> > ============================================================
> >
> > This is the Python Mailinglist
> >
> > //www.freelists.org/list/python
> >
> > Listmaster: Jürgen Mages jmages@xxxxxx
> >
> > To unsubscribe send an empty mail to
> > python-request@xxxxxxxxxxxxx
> > with 'unsubscribe' in the subject field.
> >
> > ============================================================
> >
> >
>
>
> ============================================================
>
> This is the Python Mailinglist
>
> //www.freelists.org/list/python
>
> Listmaster: Jürgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
--
Marc Hübner
Hauptstrasse 47
CH-4143 Dornach
0041 61 701 25 14
marchuebner@xxxxxx
http://www.liegerad-tour.ch.vu/
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
