[python] Re: welding
- From: Ronald Hongsermeier <rwhongser@xxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Mon, 02 Jun 2008 23:52:08 +0200
Greetings Marc and Listies!
There are oooodles of things to do with such a machine. Some of the machines of
this type I looked at on the web have over 50 differently programmable modes of
operation. For me, the investment is much too high. I think I may hire out some
welding sometime later this year. My nephew is a crack-welder, but too many
thousand miles and 1 ocean too far away.
Thanks for the infos
Ron
> -----Ursprüngliche Nachricht-----
> Von: "Marc Huebner" <marchuebner@xxxxxx>
> Gesendet: 02.06.08 15:12:03
> An: python@xxxxxxxxxxxxx
> Betreff: [python] Re: welding
> Hi Ron
>
> With the machine I welded a lot of 1mm (wall) tubes. In steel, stainless
> steel and alu it's no problem. Up to 8mm material should be no problem, but
> of course the TIG method is more used for fine work. Also to connect thin
> material with thick is possible.
>
> Marc
>
>
>
>
>
> -------- Original-Nachricht --------
> > Datum: Mon, 02 Jun 2008 12:39:01 +0200
> > Von: Ronald Hongsermeier <rwhongser@xxxxxx>
> > An: python@xxxxxxxxxxxxx
> > Betreff: [python] Re: welding
>
> > Hi Marc,
> >
> > What are the steel welding parameters of this machine? I.e., what is the
> > thinnest and thickest material that you can weld with it?
> >
> > I think that for purposes of bike/recumbent welding the wall thickness
> > necessary will probably be considerably smaller than the capacity of your
> > machine.
> >
> > thx,
> > ron
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: "Marc Huebner" <marchuebner@xxxxxx>
> > > Gesendet: 02.06.08 11:38:37
> > > An: python@xxxxxxxxxxxxx
> > > Betreff: [python] welding
> >
> >
> > > Hi all welders and non-welders!
> > >
> > > About 6 years ago I bought a used AC/DC TIG (WIG) welding machine. The
> > price was at about 700 Euro. A new one is at about 3000...... .
> > > AC/DC means, that you can weld steel and stainless steel with direct
> > current (DC) and aluminum with alternating current (AC).
> > > The big advantage of the TIG machine compared to MIG/MAG machines is
> > that you don't have to add always material. It's possible to just melt two
> > parts together.
> > > For me it was worth to buy this machine, I'm very happy with it.
> > > I'm not a friend of brazing when no pipe couplings (=capillary socket
> > ??) are used. With brazing you spend a lot of time to make fit two parts
> > together. With welding you can easy fill up gaps of 2mm!
> > >
> > > Happy building!
> > >
> > > Marc
> > >
> > >
> > >
> > >
> > > --
> > > Marc Hübner
> > > Hauptstrasse 47
> > > CH-4143 Dornach
> > > 0041 61 701 25 14
> > > marchuebner@xxxxxx
> > > http://www.liegerad-tour.ch.vu/
> > >
> > > Psssst! Schon vom neuen GMX MultiMessenger gehört?
> > > Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
> > > ============================================================
> > >
> > > This is the Python Mailinglist
> > >
> > > //www.freelists.org/list/python
> > >
> > > Listmaster: Jürgen Mages jmages@xxxxxx
> > >
> > > To unsubscribe send an empty mail to
> > > python-request@xxxxxxxxxxxxx
> > > with 'unsubscribe' in the subject field.
> > >
> > > ============================================================
> > >
> > >
> >
> >
> > ============================================================
> >
> > This is the Python Mailinglist
> >
> > //www.freelists.org/list/python
> >
> > Listmaster: Jürgen Mages jmages@xxxxxx
> >
> > To unsubscribe send an empty mail to
> > python-request@xxxxxxxxxxxxx
> > with 'unsubscribe' in the subject field.
> >
> > ============================================================
>
> --
> Marc Hübner
> Hauptstrasse 47
> CH-4143 Dornach
> 0041 61 701 25 14
> marchuebner@xxxxxx
> http://www.liegerad-tour.ch.vu/
>
> Psssst! Schon vom neuen GMX MultiMessenger gehört?
> Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
> ============================================================
>
> This is the Python Mailinglist
>
> //www.freelists.org/list/python
>
> Listmaster: Jürgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
>
>
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
