Hey guys,
Thanks for the info. It sounds like this is another common challenge that
all newbies face, and unfortunately nobody has cooked up a workaround yet.
In my case, it's not so much navigating the board; as others have said that
could be done by space-counting or marking the area somehow. The problem
comes with making sure all the pieces I'm connecting to it are in the right
place. For example, my kit came with an LED light (four wires) a stepper
motor (3-4 wires) and a bunch of other gizmos I haven't learned by name yet
with 3-4 wires, and it seems all these have to be plugged into very
specific cells on the breadboard. But these wires are extremely short, so
it's not like I can go one at a time like with either ends of a resistor.
With resistors I used the one end for space-counting like someone suggested
using a stylus. But with these things that have multiple wires to connect
that isn't as straightforward. I could get the far left wire of the LED
into the right hole, but it was hard to tell if the other 3 were even in
the holes.
But let me take a step back and ask a newbie question here: what exactly is
the purpose of a breadboard? I read where one of you said you never used
one before, so it sounds like you can work with the Pi/Arduino without
having to mess with them. From what I've read on Google, it sounds like
they are just for experimenting, so I'm kind of wondering what else there
is.
Anyway, thanks again and have an awesome weekend. :)
On Thu, Aug 9, 2018 at 10:41 PM, Tom Fowle <wa6ivgtf@xxxxxxxxxxx> wrote:
I remember those big kits with peg board chassis Yes completely accessible
so far as manipulating components went. There are some modern snap
together
kits intended for younger kids, but they seem to be very limited in what
you
can do with them and cost like sin.
I think one is named something like "snap-bit"
Ken Perry of APH and Josh Miele of Smith-Kettlewell may be working with
them
a bit.
Tom Fowle WA6IVG
On Thu, Aug 09, 2018 at 01:09:37AM -0400, Scott Granados wrote:
You know what I used to like were the electronic training kits that hadthe leads attached to springs and you???d patch the kits with wires to form
the connections. Totally impractical for building anything permanent but
was a great way to learn electronics for a blind fellow like me anyway.
Built radios and oscillators etc by hand following the wire by numbers book.
accommodate Integrated chips and other precisely spaced components. I
On Aug 9, 2018, at 12:01 AM, Eric Oyen <eric.oyen@xxxxxxxxx> wrote:
Unfortunately, the spacing happens to be an industry standard to
worked extensively with these back in the 1980???s when in high school and
later at DeVry Institute of Technology. Believe me, even the sighted can
have issues with using these boards. I can tell you that using another type
of board (for wire wrapped circuits) can be a real nightmare for us blinks.
own circuits. I still have a visual memory of how things can be placed andBtw, I have been having some thoughts to getting back into building my
it???s not all that hard to use a small set of needle nosed pliers to bend
leads to the right distance. And yes, with some short wire leads, you can
put together a surprisingly neat circuit that is even easy for a blind
person to follow.
on the resistors as well as the values stamped on the capacitors.
Now, I just wonder if there is an app that will read the color codes
(reading
DE n7zzt Eric.
On Aug 8, 2018, at 8:20 PM, Mike Fox <mfox32322@xxxxxxxxx> wrote:
Hey guys,
So I finally got a multimeter and broke the first visual barrier
They'reresistors) and five minutes later I've hit another: breadboards.
of anlike an Excel spreadsheet for Ant-Man. If I could shrink to the size
but soant, I might have a shot at putting everything in the right place,
wiresfar that's my best guess as to how to crack this one. The "cells" are
spaced way, way too close together, and when components have 3 or 4
know ifthat need to be plugged in at exactly the right place, I just don't
pluggingI can do it. I got one of my projects working by sheer fluke,
tellstuff around wherever I guessed the crappy diagram said, but I can
andthis probably isn't the right way to do things. :)
So is there such a thing as a breadboard with better spacing between
cells? Or maybe a way to link two wires without being required to use
one? I heard somewhere that "electrical tape" can tape them together
far-fetched.they would still conduct electricity, but that sounds pretty
by thisEither way, I'd be interested in any strategies you guys use to get
Raspberry Pi Foundation.insanely way-too-visual obstacle. Thanks in advance. :)
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the
views and attitudes expressed by the subscribers to this list do not
This list is not affiliated to the Raspberry Pi Foundation and the
reflect those of the Foundation.
Pi Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry
views and attitudes expressed by the subscribers to this list do not
This list is not affiliated to the Raspberry Pi Foundation and the
reflect those of the Foundation.
Pi Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry
and attitudes expressed by the subscribers to this list do not reflect
This list is not affiliated to the Raspberry Pi Foundation and the views
those of the Foundation.
===========================================================
Mike Ray, list creator, January 2013
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and attitudes expressed by the subscribers to this list do not reflect
those of the Foundation.
Mike Ray, list creator, January 2013