Hey guys, happy TGIF!
Just to clarify, I've been using the breadboard primarily with the Arduino
for now. Like Jeffrey, my experience with computers and computer science
has been primarily on the code side of things. And my work with the Pi has
been very similar to his; all hooking up has been via USB, and I haven't
used any of its hardware capabilities beyond as a min-PC. But I've been
wanting to learn the hardware side of things, because if I can get to where
I know what I'm doing, or at the very least know the basics, I could take
it to the next level by hooking stuff up to the Pi.
But with that said, I really like the toothpick idea! Not just for
space-counting, but for marking where stuff should go. For example, the
tutorials I'm following now have you plugging an RGB LED into cells D47 to
D50 (I may be off on that) of the breadboard. So if I put toothpicks on
i.e. D45 and D51, that might help me confirm that the four wires fit neatly
between the two. So far, that seems to be the best solution I've heard
(sorry, I didn't get the whole fish bone corral thing, LOL). Anyway, I
sure appreciate all your patience and awesome suggestions.
Anyway, let me ask you this: what do the "cells" represent? I've been
using Excel terminology because that's the best thing I can compare it to.
It has letters and numbers, and I bet they all mean something.
On Fri, Aug 10, 2018 at 3:07 PM, Angelo T Sonnesso <asonnesso@xxxxxxxxx>
wrote:
Why not use a tooth pick>
73 N2DYN Angelo
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx
On Behalf Of john peacocke
Sent: Friday, August 10, 2018 1:07 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: Alternative to breadboards?
I would be very reluctant to poke around with a conductive wire. The
Raspberry- Pi is very sensitive to mis-connection or the shorting
together
of adjacent points.
This is in comparison to the Arduino, for instance, which is much tougher.
Ok, you say, you ALWAYS SWITCH OFF before making tests..... ...... Always?
I generally advise that the breadboard, along with the processor board,
should be firmly located on a decent sized tray capable of supporting the
wrist while you are picking along the rows of holes.
TMS, OM........................ meaning Tune for Maximum Smoke.
john
Sent from Mail<https://go.microsoft.com/fwlink/?LinkIdU0986> for Windows
10
________________________________
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx
on behalf of Pranav Lal <pranav.lal@xxxxxxxxx>
Sent: Friday, August 10, 2018 5:51:15 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: Alternative to breadboards?
Mike,
As for breadboards, I use a a wire to count holes. It is not efficient but
kind of works.
Pranav
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and attitudes expressed by the subscribers to this list do not reflect
those of the Foundation.
Mike Ray, list creator, January 2013
