Hi all,
I installed speakup on the PI without Mike's OMX library and I can report
the following:
1. Speech works but, it is very distorted and the volume is not as loud
if using Mike's code.
2. The default settings is very slow.
3. I will revert to Mike's code as this seems to be a lot better.
4. When writing the image to a 128Gb card this gave me lots of problems
as Windows does not see the boot partition and insists on formatting the
card. I had to revert to a 32Gb card.
5. I am using Raspberry OS lite for this experiment.
My goal is to have a setup which has speech in both terminal and in mate but
with only software which works with speech.
So, back to writing and rewriting cards today.
Thanks.
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
