[raspberry-vi] Re: running phone systems on an RPi4 (was "Raspberry Pi 4")
- From: Tim Chase <raspberry-vi@xxxxxxxxxxxxxxxxx>
- To: raspberry-vi@xxxxxxxxxxxxx
- Date: Thu, 5 Mar 2020 11:37:45 -0600
On March 5, 2020, Scott Granados wrote:
running small phone systems
Could I trouble you share more about your configuration? I've had an
itching to do this for a long time and never actually moved forward
with it. So I've got a bunch of questions (smile):
- Are you using traditional phones with special POTS hardware
attached to your RPi? Or are you using VoIP phones (possibly with
PoE) or soft-phones?
- Do you have any recommendations on choosing a VoIP backend
provider to route calls to the POTS network? Or more generically,
how are you connecting to the outside POTS world?
- How many internal phones does your RPi setup handle?
- Are you running more than one direct-inward-dial-in (DID) number,
or do you share a smaller pool of DID numbers across a greater
number of internal phones?
===========================================================
The raspberry-vi mailing list
Archives:
//www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
Other related posts:
- » [raspberry-vi] ***UNCHECKED*** Re: running phone systems on an RPi4 (was "Raspberry Pi 4") - Tim Chase
