[torontocbm] Re: MPS 801 capacitor?

From: Edward <hunt4homes@xxxxxxxxx>
To: torontocbm@xxxxxxxxxxxxx
Date: Tue, 11 May 2021 09:13:20 -0400

replacing those leaking caps for sure to start with. After checking if
that leaked corrosion caused any loss of continuity with surrounding
traces. Double check the entire board for possible issues (like bad solder
joints)
Good luck!

On Tue, May 11, 2021 at 9:07 AM Ben Kayfetz <benkayfetz@xxxxxxxxxxx> wrote:

Hey guys,

I pulled a Commodore MPS 802 printer out of storage. I figured it would
be a nice upgrade from my MPS 801. Unfortunately, it did not power on. On
closer inspection it appears that these two capacitors (attached photos)
are done.

Does anyone know where I could pick these up locally? Or maybe somebody
has some capacitors I can take off their hands?

I don't regularly repair things at this level so I don't really need to
buy a quantity of them online.

However, I should re-cap my c64 so I should also pick up a set a
capacitors for it.

Any suggestions are appreciated!

[image: Image]

[image: Image]

[image: Image]

this email was composed and sent from my smartphone. please excuse any
errors

Ben Kayfetz
416-831-6339

--
___________________________________________________________________

* Edward W. Dongres ** Realtor*
*RE/MAX Real Estate Centre Inc.*

* Direct: 647-405-7303*

Follow-Ups:
- [torontocbm] Re: MPS 801 capacitor?
  - From: Edward

References:
- [torontocbm] MPS 801 capacitor?
  - From: Ben Kayfetz

[torontocbm] Re: MPS 801 capacitor?

Other related posts: