[audacity4blind] Re: Issues with a new USB cassette player
- From: "Jacob Kruger" <jacob@xxxxxxxxxxxxx>
- To: <audacity4blind@xxxxxxxxxxxxx>
- Date: Tue, 4 Nov 2014 08:06:09 +0200
I just used a standard 3.5mm audio jack, and think didn't need to do anything
like turn on listening to line-in in sound card settings, but, can't remember
right now, but, main thing was making sure the recording device in audacity was
set to line-in, and not just microphone.
Stay well
Jacob Kruger
Blind Biker
Skype: BlindZA
...Roger Wilco wants to welcome you, to the space janitor's closet...
----- Original Message -----
From: Jessica Kendall
To: audacity4blind@xxxxxxxxxxxxx
Sent: Tuesday, November 04, 2014 4:10 AM
Subject: [audacity4blind] Re: Issues with a new USB cassette player
Hi everyone,
thanks for your replies, i'll try that.
do you need a jack extention or a double adaptor for the headphones to plug
in to the cassette recorder and pc?
Thanks again :)
jess.
------------------------------------------------------------------------------
From: jacob@xxxxxxxxxxxxx
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Issues with a new USB cassette player
Date: Mon, 3 Nov 2014 17:45:27 +0200
When I've recorded tapes and LP's using audacity, I just used the stereo
line-in on muy laptop, instead of mono microphone socket..?
Stay well
Jacob Kruger
Blind Biker
Skype: BlindZA
...Roger Wilco wants to welcome you, to the space janitor's closet...
----- Original Message -----
From: Matthew Bullis
To: audacity4blind@xxxxxxxxxxxxx
Sent: Monday, November 03, 2014 3:43 PM
Subject: [audacity4blind] Re: Issues with a new USB cassette player
I also tend to use the normal earphone socket, since I haven't really had
good luck with USB devices. USB seems to carry quite a bit of noise, and also
most act like their own sound card, so I don't use it. I bought a USB
turntable, but quickly dispensed with the USB connection and went the
traditional plug-in route, since the USB just was too noisy.
Matthew
Other related posts:
