[ddots-l] Re: Bus troubles
- From: "Jim Jackson" <cs2007@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 24 Oct 2007 15:33:18 -0400
Seemly, I've set things up pretty much as you've described with exception to
the sends. Now, about the sends, I assume that I will insert them in the
track pane; do I insert sends on each track based on the effects that I'm
going to be using? Do I then rout those sends to the corresponding effects
bus in the bus pane? For example, create a send called subgroup1's verb and
rout that send to the subgroup1's verb bus? Hope I'm making since. Thanks
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Luis Elorza
Sent: Wednesday, October 24, 2007 12:16 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Bus troubles
the truth i didn't understand your setup.
and from what i read you are only routing, this means that you are directing
the outputs to some busses but why don't you use auxiliary sends?
the way i do it is by creating a bus for every effect like reverb, delay,
chorus etc, and a bus for every subgroup like backing vocals, lead vocal ,
violins, brass, etc, and then insert a send for every effect you want to
apply to a bus.
----- Original Message -----
From: "Jim Jackson" <cs2007@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, October 23, 2007 6:23 PM
Subject: [ddots-l] Bus troubles
Hello all, I’ve created a project using producer 6.2 with 4 tracks of audio
and 5 tracks of midi. I went in to the bus pane and setup the following,
A. I have the master bus which is routed to the out of my Delta 10/10,
B. Subgroup1’s, out as well as Subgroup2’sout are routed to vocal master
C. Subgroup1’s delay and verb outs, are routed to effects send1
D. Subgroup2’s delay and verb out are routed to effect send1
E. Vocal master and effects send1 out’s are routed to master.
In the track pane, I have tracks 1 and 2’s outs routed to subgroup1. I have
track 3’s out routed to subgroup2. Whenever I patch an effect (verb or
delay) in the bus pane in to the effects bin of the corresponding bus, (verb
in the verb of subgroup1’s verb bus), I can’t hear the verb applied. I solo
the verb bus but everything plays as if nothing’s soloed. I hope I’m
making some since attempting to explain the problem. Any ideas on the
matter would be appreciated. Thanks
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.6/1086 - Release Date: 10/22/2007
7:57 PM
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.6/1086 - Release Date: 10/22/2007
7:57 PM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.9/1090 - Release Date: 10/24/2007
8:48 AM
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
