[ddots-l] Re: FW 1884: Master slider not working
- From: Stacy Blackwell <stacy.blackwell@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 29 May 2009 08:43:28 -0500
Thanks for the advice, Robert. Last night the Master slider worked on earlier
recorded projects, so I don't know why it's decided not to work on these
certain songs. What I did was that I used the same "project" to record my band
and just kept saving each song, and then just recorded over what we had just
done. Evidently there is something I did on the first song's recording. Funny
you mentioned the Input and Output of the FW 1884, because of about 1 out of 10
times in turning the DAW on, the FW 1884 sliders (all of them) do not
respond--I then have to go to the Control Surface menu and select the FW
Control for the Input and Output. I know that improper shut down and the
improper turning off the FW 1884 has caused this. I will check these settings
tonight to make sure they are still FW Control. Does anybody else have
problems with the FW Control setting getting changed somehow to either FW ports
1 or even a USB keyboard as an Input or Output?
Thanks again, Robert. I'll keep working on it.
S.B. > Date: Fri, 29 May 2009 10:56:34 +0200
> From: drachenkind@xxxxxxxxxxxxxxxxxxx
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: FW 1884: Master slider not working
>
> make shure that the following thinkgs are true:
> 1. you have downloaded and installed the last drivers and firmware you
> can get from phil muirs Website.
> 2. you are in computermode
> 3. you selected the fw-1884-controlport in the surfaces-list for in and out
> regards, Robert.
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
_________________________________________________________________
Hotmail® has ever-growing storage! Don’t worry about storage limits.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage1_052009
Other related posts:
