[ddots-l] Re: FW 1884: Master slider not working
- From: "Phil Muir" <ddots@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 2 Jun 2009 10:22:57 +0100
Hmm, a couple of things to try. have you tried going into monitor mode then,
pressing Control Shift and function key F8 to reset the MIDI side of the board?
Then, Control Shift and function key F10 to reset the board to unity gain?
Once you have done all of that, power down your PC and the FW-1884. Then, turn
everything on and see what happens.
If you want the latest firmware and drivers then, you will find all of that
over on:
http://www.philmuir.com/fw1884.html
Enjoy!
Regards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: Stacy Blackwell
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, June 01, 2009 2:50 PM
Subject: [ddots-l] Re: FW 1884: Master slider not working
Ok. Last night my Axiom 61 wasn't working right -- the soft wynths would
play, but the Axiom wouldn't record. So I rebooted. Then I had to change the
Input and Output settings because they had changed. I'm use to doing this now,
but I don't know why these things happen occasionally. Is the latest firmware
on the Tascam website?
But...I cannot find out why the Master slider on the FW 1884 isn't
controlling the master volume, and it's just on a certain group of songs.
Baffling. I think I'm going to wipe out all AUX sends and buses except for the
Master bus on a song, save it, and then reboot. I don't think this will do
anything, but I've got to try something. But I have noticed that on these
certain songs, the output volume of the Master bus is way above 0 while the
tracks assigned to the master bus are below 0 db. Maybe I'm overdriving the
buses somehow. Whatever the case, the Master slider should control the overall
volume.
Thanks Robert and Jack for your comments.Oh, to answer your other
question--my originals seem to cover all forms of music while my band plays
primarily country and classic rock Fun (grin). Thanks for asking.
S.B. > Date: Sat, 30 May 2009 14:45:31 +0200
> From: drachenkind@xxxxxxxxxxxxxxxxxxx
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: FW 1884: Master slider not working
>
> Hi
> I had the same problem, thats why I talked about it.
> Well, perhaps you changed some settings without wanting it.
> wich kind of music do you make with your band? wich instruments?
> make sure you have the latest firmware installed on your fw 1884. then
> the portproblem is fixed.
> regards, robert.
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
------------------------------------------------------------------------------
Hotmail® has ever-growing storage! Don’t worry about storage limits. Check it
out.
Other related posts:
