Thanks Floyd, looking forward to your report.
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> On Behalf Of
floyd white
Sent: Tuesday, January 7, 2020 4:01 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Interface apprehension
I know You can set bit depth and buffer size and hear what it's doing.
Honestly, I don't know about the rest. I'll take a look when I bring the
machine up tomorrow.
I'll let you know what I find.
On 1/7/20, DJ X <megamansuperior@xxxxxxxxxxx> wrote:
Thanks Floyd. What's the status of the control panel, I know at onePLEASE READ THIS FOOTER AT LEAST ONCE!
point and time Motu's control panel was usable, but how is it now?
Still usable, or have they modified things to the point that screen
reader interaction isn't possible?
Motu does have some nice units, I remember that 24IO was popular among
some of my customers some years ago. So was there 828 box.
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> On
Behalf Of floyd white
Sent: Tuesday, January 7, 2020 3:35 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Interface apprehension
Hi DJX,
Well I'm a full blown studio here, So I went to my safe zone with the
MOTU 24AI and 24 AO. Those are replacing my long standing (still
standing) 24 I/O.
I need 24 in and at least 8 out.
It's a bit strange syncing them up. It's done via the MOTU specific
web site for that.
And it's important that I tell you I don't want or use any of the on
board effects and all that. It's not at all my workflow.
So after setup, I almost never go into the cue mix and control panel
for them. Basically it's set up and walk away in my case.
I chose not to go with Antelope Audio after much research. Their
support has just a terrible reputation.
Thanks,
Floyd...
On 1/7/20, DJ X <megamansuperior@xxxxxxxxxxx> wrote:
Thanks Floyd, he certainly has nothing to worry about, but given allPLEASE READ THIS FOOTER AT LEAST ONCE!
the chatter the concern is justifiable I guess.
Which Motu unit did you get? What is your experience, mainly with
accessibility of the hardware and software (control panel/app)?
TIA for any info you can provide.
Regards, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> On
Behalf Of floyd white
Sent: Tuesday, January 7, 2020 3:12 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Interface apprehension
Hi Thomas,
I think most of the chatter you're hearing is about older systems and
interfaces. I would assume you'll be getting Windows 10 and an
appropriately newer version of a screen reader.
I wouldn't worry to much about interfaces. A whole lot of them out
there and most are very good.
I personally have used MOTU for many years without any issues and
have a brand new version with my new system etc.
No problems whatsoever. And it sounds tremendous.
Hope this helps,
Floyd...
On 1/7/20, Thomas Smith <thomaspianosmith@xxxxxxxxx> wrote:
List, I am getting nervous because I am having a daw built "NOW" andPLEASE READ THIS FOOTER AT LEAST ONCE!
I am hearing a lot of chatter about drop-outs, crashes, and
questionable interfaces.
Three questions:
Are these problems the norm or are they the exception to the rule?
Are there any interfaces that I can confidently work wit or should I
expect trouble from all?
And maybe a third:
If I am to compose and record the best that I can, should I prepare
myself to plumb the bowels of my daw?
I'm starting to feel some doubt.
thanks for indulging me.
tom smith
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
