[ddots-l] Re: Meters reading in CT5
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 4 Sep 2006 16:14:12 -0400
Hi HF!
That sure did it! The lock peak was not clicked.
Thanks very much, everything works properly now. Guess it pays to read the
manual once in a while!
Jean
----- Original Message -----
From: HF
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 3:28 PM
Subject: [ddots-l] Re: Meters reading in CT5
Jean
It's not just you.
Go through Section 26 in the CT manual. It'll help.
You might have to do some of the procedures a couple of times.
But mostly you have to make sure that four things are checked in each meter
submenu.
HF
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 02, 2006 3:38 PM
Subject: [ddots-l] Meters reading in CT5
Hello Everyone!
Has anybody had success in reliably reading the peak audio meters in CT 5?
Just installed version 5.1 and thought that this would fix the problem, but
it didn't!
Sometimes it works, but most of the time I get a message to the effect
that no audio has been recorded!
Is this only happening to me?
Jean
Please visit my Web site at: www.studiomontebello.com
Other related posts:
