[ddots-l] Re: Meters reading in CT5
- From: HF <hermanfermin@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 4 Sep 2006 16:37:48 -0400
Or bang your head against the wall, which ever is more productive at the time...
Sometimes I can't decide which.
Let us know if they are reading correctly for you?
Do they make sense, I've almost given up on meters because sometimes they don't
give me levels that are incongruent to what I'm hearing. Examples, a vocal that
is loud should not be at minus 80. I don't know much, but minus 80 should be
barely audible. Now to make things more confusing, that same minus 80, on the
next day will give me a range between minus 10 and minus 2, which is more in
line with what I hear.
Hopefully we'll get better meter reading in Sonar 6.
HF
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 4:14 PM
Subject: [ddots-l] Re: Meters reading in CT5
Hi HF!
That sure did it! The lock peak was not clicked.
Thanks very much, everything works properly now. Guess it pays to read the
manual once in a while!
Jean
----- Original Message -----
From: HF
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 3:28 PM
Subject: [ddots-l] Re: Meters reading in CT5
Jean
It's not just you.
Go through Section 26 in the CT manual. It'll help.
You might have to do some of the procedures a couple of times.
But mostly you have to make sure that four things are checked in each meter
submenu.
HF
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 02, 2006 3:38 PM
Subject: [ddots-l] Meters reading in CT5
Hello Everyone!
Has anybody had success in reliably reading the peak audio meters in CT 5?
Just installed version 5.1 and thought that this would fix the problem,
but it didn't!
Sometimes it works, but most of the time I get a message to the effect
that no audio has been recorded!
Is this only happening to me?
Jean
Please visit my Web site at: www.studiomontebello.com
Other related posts:
