[ddots-l] Re: Meters reading in CT5
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 4 Sep 2006 17:19:32 -0400
Hi HF!
I must admit that I haven't given it an extensive test, but with one project
loaded, all levels on all audio tracks read properly. I haven't tried recording
levels yet though, will do that later.
Will keep you posted.
Jean
----- Original Message -----
From: HF
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 4:37 PM
Subject: [ddots-l] Re: Meters reading in CT5
Or bang your head against the wall, which ever is more productive at the
time...
Sometimes I can't decide which.
Let us know if they are reading correctly for you?
Do they make sense, I've almost given up on meters because sometimes they
don't give me levels that are incongruent to what I'm hearing. Examples, a
vocal that is loud should not be at minus 80. I don't know much, but minus 80
should be barely audible. Now to make things more confusing, that same minus
80, on the next day will give me a range between minus 10 and minus 2, which is
more in line with what I hear.
Hopefully we'll get better meter reading in Sonar 6.
HF
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 4:14 PM
Subject: [ddots-l] Re: Meters reading in CT5
Hi HF!
That sure did it! The lock peak was not clicked.
Thanks very much, everything works properly now. Guess it pays to read the
manual once in a while!
Jean
----- Original Message -----
From: HF
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 3:28 PM
Subject: [ddots-l] Re: Meters reading in CT5
Jean
It's not just you.
Go through Section 26 in the CT manual. It'll help.
You might have to do some of the procedures a couple of times.
But mostly you have to make sure that four things are checked in each
meter submenu.
HF
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 02, 2006 3:38 PM
Subject: [ddots-l] Meters reading in CT5
Hello Everyone!
Has anybody had success in reliably reading the peak audio meters in CT
5?
Just installed version 5.1 and thought that this would fix the problem,
but it didn't!
Sometimes it works, but most of the time I get a message to the effect
that no audio has been recorded!
Is this only happening to me?
Jean
Please visit my Web site at: www.studiomontebello.com
Other related posts:
