[ddots-l] Re: Performance editing on the motif Es7 for simple splits
- From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 6 May 2007 13:57:45 -0400
Wow. I do this all the time, but somehow can't seem to think of the steps at
the moment due to fogging of my brain. If you start from an initialized
performance, press f2 to go into the part where you select your sounds on
each part. Part 1 should already be selected and have a piano patch
assigned. If you don't want that patch, use the left arrow to get to the
bank selection, then press inc or dec to select the bank, then press right
arrow to get to the patch selection and press inc/dec or the wheel to select
the sound. Once you have the sound selected, you will want to assign the key
ranges. If you hold down sf4 while pressing a key, this assigns the low end
range of the part. Sf5 while holding down a key selects the high end range.
So, for instance, if part 1 has a piano souned, you can split it at middle C
by holding down sf4 and pressing middle C. This will cause everything below
middle C to be silent and above to have the piano sound. Then, press down
arrow to select part 2, and press sf1 to bring up a new sound for part 2.
Then repeat the procedure.
--
Damon Fibraio
screen names -- aol: dfibraio...msn dfibraio@xxxxxxxxxxxx skype: dfibraio
web sites: personal music site: http://www.keyboardguy.com. band:
http://www.queenoftheryche.com. Internet Radio station:
http://www.nhbradio.com
Internet radio show every Wednesday night from 8 to 11 pm eastern
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of fioresq1@xxxxxxxxxxx
Sent: Sunday, May 06, 2007 9:28 AM
To: motif-help@xxxxxxxxxxx
Cc: ddots-l@xxxxxxxxxxxxx; midimag
Subject: [ddots-l] Performance editing on the motif Es7 for simple splits
Has anyone donea tutorial on making a performance on the motif Es7? I'm
looking to simply make some splits, organ and brass etc. Can't seem to
follow the manual on this. I don't want to change effects from the original
sounds or anything that complkicated.
If there is no tutorial, could someone just quickly give me the steps,
including storage? Thanks in advance. John Fioravanti ----- Orig
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
