[ddots-l] Re: Performance editing on the motif Es7 for simple splits
- From: <fioresq1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 6 May 2007 17:00:10 -0400
Thanks
----- Original Message -----
From: Damon Fibraio <dfibraio@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, May 06, 2007 3:54 PM
Subject: [ddots-l] Re: Performance editing on the motif Es7 for simple
splits
> John. You need to initialize a performance to get things where it is easy
to
> edit. To do this, press job, then f1, then inc, enter and inc again. This
> should get you a piano sound only. Trying to do this from an stock
> performance is going to be even harder.
>
> --
> Damon Fibraio
> screen names -- aol: dfibraio...msn dfibraio@xxxxxxxxxxxx skype: dfibraio
> web sites: personal music site: http://www.keyboardguy.com. band:
> http://www.queenoftheryche.com. Internet Radio station:
> http://www.nhbradio.com
> Internet radio show every Wednesday night from 8 to 11 pm eastern
>
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
> Behalf Of fioresq1@xxxxxxxxxxx
> Sent: Sunday, May 06, 2007 3:32 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Performance editing on the motif Es7 for simple
> splits
>
> Damon: must be doing something wrong. I'm starting out with the first
> performance on the Motif from the factory called syber step. When I hit
F2
> and do what you say I don't get bank changes or patch changes. Am I
> starting out at the wrong place, I know you said to start from an
> initiallized performance, is that something different than I'm doing.
> Thanks for all your help. John
> ----- Original Message -----
> From: Damon Fibraio <dfibraio@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Sunday, May 06, 2007 1:57 PM
> Subject: [ddots-l] Re: Performance editing on the motif Es7 for simple
> splits
>
>
> > Wow. I do this all the time, but somehow can't seem to think of the
steps
> at
> > the moment due to fogging of my brain. If you start from an initialized
> > performance, press f2 to go into the part where you select your sounds
on
> > each part. Part 1 should already be selected and have a piano patch
> > assigned. If you don't want that patch, use the left arrow to get to the
> > bank selection, then press inc or dec to select the bank, then press
right
> > arrow to get to the patch selection and press inc/dec or the wheel to
> select
> > the sound. Once you have the sound selected, you will want to assign the
> key
> > ranges. If you hold down sf4 while pressing a key, this assigns the low
> end
> > range of the part. Sf5 while holding down a key selects the high end
> range.
> > So, for instance, if part 1 has a piano souned, you can split it at
middle
> C
> > by holding down sf4 and pressing middle C. This will cause everything
> below
> > middle C to be silent and above to have the piano sound. Then, press
down
> > arrow to select part 2, and press sf1 to bring up a new sound for part
2.
> > Then repeat the procedure.
> >
> > --
> > Damon Fibraio
> > screen names -- aol: dfibraio...msn dfibraio@xxxxxxxxxxxx skype:
dfibraio
> > web sites: personal music site: http://www.keyboardguy.com. band:
> > http://www.queenoftheryche.com. Internet Radio station:
> > http://www.nhbradio.com
> > Internet radio show every Wednesday night from 8 to 11 pm eastern
> >
> > -----Original Message-----
> > From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> > Behalf Of fioresq1@xxxxxxxxxxx
> > Sent: Sunday, May 06, 2007 9:28 AM
> > To: motif-help@xxxxxxxxxxx
> > Cc: ddots-l@xxxxxxxxxxxxx; midimag
> > Subject: [ddots-l] Performance editing on the motif Es7 for simple
splits
> >
> > Has anyone donea tutorial on making a performance on the motif Es7? I'm
> > looking to simply make some splits, organ and brass etc. Can't seem to
> > follow the manual on this. I don't want to change effects from the
> original
> > sounds or anything that complkicated.
> > If there is no tutorial, could someone just quickly give me the steps,
> > including storage? Thanks in advance. John Fioravanti ----- Orig
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
