Hello all.
My input for the audio tracks is the stereo ASEO FW1884 Analogue 1. I'm
recording from a Yamaha P-80 which has a left and a right stereo jack: The
keyboard is connected to my Mackey 1202 mixer. The MIDI tracks work fine. It's
just the audio tracks that I'm having problems with. I hope this answers some
of your questions.
Sent from my iPhone
On Apr 21, 2019, at 10:04 AM, Nick Dotson <nickdotson@xxxxxxxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
There are exceptions which probably prove Chris’ rule, ie. Rickenbacher
guitars like my 12-string which has a stereo out jack, but it seems to
require a no longer and hard to obtain DI-box..., and my Mackie mixers all
have single 1/4 inch stereo inputs...
Sent from W. Nick Dotson's iPhone
On Apr 21, 2019, at 09:30, Chris Smart <csmart8@xxxxxxxxx> wrote:
to put it another way, a single input on a piece of professional audio gear
is almost always mono.
At 10:25 AM 4/21/2019, you wrote:
If you are recording audio through only one input on your audio interface,
those inputs are usually in left/right pairs.
Try panning the track to the center in Sonar, or if that doesn't work, pan
that input to the center in your audio interface's control pannel software.
Just a suggestion. That's what I had to do here with a single microphone
and my Focusrite interface.
At 05:08 AM 4/21/2019, you wrote:
Good morning everyone.
Each time I try to record an audio track using Sonar, I only get sound out
of one speaker as soon as I arm the track. The only solution seems to be
to press the interleave button on each audio track to set everything to
mono, but I don't want to record that way if I don't have to. I came up
with this solution by reading section 7 of the Caketalking manual, but
perhaps there is something I missed. Thanks in advance for any assistance
you can provide.
Eddie
Sent from my iPhonePLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
