[ddots-l] Re: strange behavior
- From: D!J!X! <megamansuperior@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 13 Jun 2012 20:11:15 -0400
Hi Neville, if you've got xp pro it's already enable, your hardware should
also have it enabled. However, contact me off list to discuss this further,
to make sure that you go down the best rout with this; there are quite a few
things that could be at falt, or that might not work for you.
Email me, djx@xxxxxxxxxxxxxx
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Neville Peter
Sent: Wednesday, June 13, 2012 2:41 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: strange behavior
Wow! It sounds complicated. How do I enable pae and do a reg tweak? I'm not
sure that I would feel comfortable trying to do that myself.
May the Peace of God which passes all understanding guard your heart and
mind in Christ Jesus. God bless you!
Website http://www.nevillepeter.com
Email neville@xxxxxxxxxxxxxxxx
Phone 407-222-4488
Web store http://www.nevillepeter.com/store
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of D!J!X!
Sent: Tuesday, June 12, 2012 1:53 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: strange behavior
You can increase the xp home limit by enabling pae, and doing a reg tweak,
XP pro sees the max allowed by the x86 platform, usually 3.25 to 3.5,
depending on your hardware configuration and the number of resources and
addresses that your bios has to reserve for other hardware present on your
system.
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Neville Peter
Sent: Tuesday, June 12, 2012 12:48 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: strange behavior
What about XP pro?
May the Peace of God which passes all understanding guard your heart and
mind in Christ Jesus. God bless you!
Website http://www.nevillepeter.com
Email neville@xxxxxxxxxxxxxxxx
Phone 407-222-4488
Web store http://www.nevillepeter.com/store
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Gibbs
Sent: Tuesday, June 12, 2012 12:42 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: strange behavior
XP Home can only see 2GB at a time.
Sent from my iPhone
On Jun 12, 2012, at 11:26 AM, Jack Conti <jackconti@xxxxxxx> wrote:
> i believe sonar will see 3.5 gb of ram onder 32bit if you have it, not
> exactly sure about this one. just trying to remember messages i read
about 2 or three years ago wich is very dangerous since i can't remember
waht i did a half hour ago <smile> At 12:08 PM 6/12/2012, you wrote:
>> I don't understand why this happens. Whenever I bounce an audio track
>> to clips or whenever I frees a soft synth, some of my other soft
>> synths that are not frozen will begin to play with a very choppy
>> glitching sound. I have to close the project in order to get them to
>> play normally again. The only thing that prevents this from happening
>> is to frees them. can anyone tell me why this is happening? It
>> happens with dimension pro and with Psym 2 and with pentagon.
>>
>> I'm thinking that this may be a memory issue. I'm running sonar on
>> windows XP pro 32 bit and my CPU is a duel core Intel with two gigs
>> of ram. A friend told me that in order to take advantage of the four
>> gigs available I need to either get windows 7 or upgrade to a 64 bit
motherboard.
>>
>> Is this a memory issue? If not how do I resolve this issue?
>>
>> May the Peace of God which passes all understanding guard your heart
>> and mind in Christ Jesus. God bless you!
>>
>> Website http://www.nevillepeter.com
>>
>> Email neville@xxxxxxxxxxxxxxxx
>>
>> Phone 407-222-4488
>>
>> Web store http://www.nevillepeter.com/store
>>
>>
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately
following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
