[ddots-l] Re: suggestions needed, audio dropouts in sonar5

  • From: <fioresq1@xxxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Sun, 23 Apr 2006 23:52:32 -0400

hf: I got the cpu working.  Thought I should clarify the controll that seems
to say buffer size, it actually shows mixing latency as the heading and
there is the "buffers in playback queue 2 That 2 doesn't seem to be able to
be changed.  then it says fast or safe.  I don't know if that has anything
to do with your problem.  John
----- Original Message ----- 
From: <fioresq1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 11:31 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


> hf: I have all those setting in sonar 4 and I'm still getting some
> crackling.  The only thing I can't check is the cpu meters with
caketalking,
> I've been told in the tutorial to present insert+controll+page dow, but
when
> I do that it says nothing.  How did you read them?  Also, I suppose you
> could be having a conflict problem since you had the card working in sonar
> 4Are you using 24 or 16 bit?  Also, be aware that in the audio options
> general tab jaws doesn't properly read the controll right before asio
butto,
> which is called buffer size.  I had a sighted person look at that area,
you
> might want to check it.  John
> ----- Original Message ----- 
> From: "hf" <neep23@xxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Sunday, April 23, 2006 8:34 PM
> Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5
>
>
> > i/o buffers are set to 128.
> > Most I've seen the CPU usage meter go up to is 24 or 25 percent.
> > I was able to get to 40 percent in Sonar 4 before I started to get any
> kind
> > of drop outs.
> > HF
> > ----- Original Message ----- 
> > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Sunday, April 23, 2006 8:18 PM
> > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5
> >
> >
> > > Have you checked your disk i/o buffers in the advanced tab of the
audio
> > > options dialog?  The setting of 128 should be good.  Have you checked
> the
> > > CPU usage meter when you have a project loaded?
> > > Gord
> > > ----- Original Message ----- 
> > > From: "hf" <neep23@xxxxxxxxxx>
> > > To: <ddots-l@xxxxxxxxxxxxx>
> > > Sent: Sunday, April 23, 2006 8:12 PM
> > > Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5
> > >
> > >
> > >> Yes
> > >> ----- Original Message ----- 
> > >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> > >> To: <ddots-l@xxxxxxxxxxxxx>
> > >> Sent: Sunday, April 23, 2006 8:01 PM
> > >> Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5
> > >>
> > >>
> > >>> Are you using asio?
> > >>> Gord
> > >>> ----- Original Message ----- 
> > >>> From: "hf" <neep23@xxxxxxxxxx>
> > >>> To: <ddots-l@xxxxxxxxxxxxx>
> > >>> Sent: Sunday, April 23, 2006 7:58 PM
> > >>> Subject: [ddots-l] suggestions needed, audio dropouts in sonar5
> > >>>
> > >>>
> > >>>>I recently started working in Sonar 5 and I am having lots of audio
> drop
> > >>>>outs. The strange thing is that, these are the same projects that I
> was
> > >>>>working on in Sonar 4, except I didn't have any drop outs in Sonar
4.
> > >>>> I kept reading as to how much faster Sonar 5 was to Sonar 4 and I'm
> > >>>> finding quite the opposite.
> > >>>> Although, it was suppose to have migrated my settings from Sonar 4,
I
> > >>>> must have either changed something or it did not migrate properly.
> > >>>> I'm running out of ideas. Please help.
> > >>>> This is mostly for audio, haven't tried too much midi yet.
> > >>>> Which settings should I be aware of in Sonar 5 that may have
changed
> > >>>> from Sonar 4?
> > >>>> HF
> > >>>> ** To leave the list, click on the immediately-following link:-
> > >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >>>> ** If this link doesn't work then send a message to:
> > >>>> ** ddots-l-request@xxxxxxxxxxxxx
> > >>>> ** and in the Subject line type
> > >>>> ** unsubscribe
> > >>>> ** For other list commands such as vacation mode, click on the
> > >>>> ** immediately-following link:-
> > >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> > >>>> Subject:- faq
> > >>>>
> > >>>>
> > >>> ** To leave the list, click on the immediately-following link:-
> > >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >>> ** If this link doesn't work then send a message to:
> > >>> ** ddots-l-request@xxxxxxxxxxxxx
> > >>> ** and in the Subject line type
> > >>> ** unsubscribe
> > >>> ** For other list commands such as vacation mode, click on the
> > >>> ** immediately-following link:-
> > >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> > >>> Subject:- faq
> > >>>
> > >>
> > >> ** To leave the list, click on the immediately-following link:-
> > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > >> ** If this link doesn't work then send a message to:
> > >> ** ddots-l-request@xxxxxxxxxxxxx
> > >> ** and in the Subject line type
> > >> ** unsubscribe
> > >> ** For other list commands such as vacation mode, click on the
> > >> ** immediately-following link:-
> > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> > >> Subject:- faq
> > >>
> > >>
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** ddots-l-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> > > Subject:- faq
> > >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts:

  1. Home
  2. ddots-l
  3. Archive
  4. 04-2006