[ddots-l] Re: suggestions needed, audio dropouts in sonar5

  • From: "hf" <neep23@xxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Sun, 23 Apr 2006 21:23:47 -0400

I ran it under Jaws 5.1 and had no drop outs whatsoever.
I'm currently using Jaws 7.

65 percent, wow Gordd.
HF
----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 8:56 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


You shouldn't get them at that low a percentage. I have run projects running at 65 or 70% before getting dropouts. If you have a project already done that exhibits dropouts, can you try running sonar with narrator instead of jaws? You should be able to load the project and run it.
Gord
----- Original Message ----- From: "hf" <neep23@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 8:34 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


i/o buffers are set to 128.
Most I've seen the CPU usage meter go up to is 24 or 25 percent.
I was able to get to 40 percent in Sonar 4 before I started to get any kind of drop outs.
HF
----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 8:18 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


Have you checked your disk i/o buffers in the advanced tab of the audio options dialog? The setting of 128 should be good. Have you checked the CPU usage meter when you have a project loaded?
Gord
----- Original Message ----- From: "hf" <neep23@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 8:12 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


Yes
----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 8:01 PM
Subject: [ddots-l] Re: suggestions needed, audio dropouts in sonar5


Are you using asio?
Gord
----- Original Message ----- From: "hf" <neep23@xxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 23, 2006 7:58 PM
Subject: [ddots-l] suggestions needed, audio dropouts in sonar5


I recently started working in Sonar 5 and I am having lots of audio drop outs. The strange thing is that, these are the same projects that I was working on in Sonar 4, except I didn't have any drop outs in Sonar 4.
I kept reading as to how much faster Sonar 5 was to Sonar 4 and I'm finding quite the opposite.
Although, it was suppose to have migrated my settings from Sonar 4, I must have either changed something or it did not migrate properly.
I'm running out of ideas. Please help.
This is mostly for audio, haven't tried too much midi yet.
Which settings should I be aware of in Sonar 5 that may have changed from Sonar 4?
HF
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts:

  1. Home
  2. ddots-l
  3. Archive
  4. 04-2006