That's an odd size. Usually, paper is 11" long and 11.5" wide or 11" long and 8.5" wide. I have been using Duxbury since 1991 and the only other size I have seen is the A4 size which is used in europe. ----- Original Message ----- From: Gary Metzler To: duxuser@xxxxxxxxxxxxx Sent: Monday, March 23, 2009 4:44 PM Subject: [duxuser] Re: please help with setting paper size Hi betsy, I think what Ann is saying the paper is 8.5 long and 11 wide. ----- Original Message ----- From: "Betsy Whitney" <brailleit@xxxxxxxxxxxxx> To: <duxuser@xxxxxxxxxxxxx> Sent: Monday, March 23, 2009 3:44 PM Subject: [duxuser] Re: please help with setting paper size > Aloha Ann, > Maybe I'm confused, but it sounds like you are using regular narrow > width paper. This is what we use all the time. I set the lines per > page at 25 and the characters per line at 30 with a binding margin of > 1. I don't have a Juliet so can't tell you how to set the embosser, > but it seems like you should be able to just go to your Document > Menu, go to embosser settings, select narrow paper 11 inch long and > then set the lines and characters. On my index, I set a top margin of 1. > Betsy > > At 09:22 AM 3/23/2009, you wrote: >>The paper is 11 inches wide and 8 and 1/2 inches from top to bottom. It >>is strange paper, having the tractor feeds on the 8 and 1/2 sides. >>ANN FOXWORTH, BRAILLE CONSULTANT > * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *