[ibis-macro] Re: A cut and paste error in IBIS v5.1?
- From: Ambrish Varma <ambrishv@xxxxxxxxxxx>
- To: Bob Ross <bob@xxxxxxxxxxxxx>, "ibis-macro@xxxxxxxxxxxxx" <ibis-macro@xxxxxxxxxxxxx>
- Date: Tue, 30 Apr 2013 13:26:39 -0700
Bob,
I didn't mean to suggest moving the text up or any such thing like that. I was
simply objecting to the 'addition' of the following text in the spec " The user
may assign any value without any restrictions within the constraints of the
Type of the variable."
The changes were invoked In BIRD 127.4 as reproduced below:
On pg. 140 replace the following lines:
| Format: (default is range)
| Value <value> Single value data
| Range <typ value> <min value> <max value>
| List <typ value> <value> <value> <value> ... <value>
with these lines:
|* Format <data_format> <data>:
|*
|* Where Format is optional and <data_format> and <data> are required.
|* <data_format> and <data> must be substituted with one of the following:
|* Value <value> Single value data. Note that Value and Default
|* (defined below) are mutually exclusive, and must not be used
|* together for the same parameter.
| Range <typ value> <min value> <max value>
| List <typ value> <value> <value> <value> ... <value>
So there must have been another BIRD to change the text. Can you or anyone else
point me to that please?
Thanks,
Ambrish.
-----Original Message-----
From: Bob Ross [mailto:bob@xxxxxxxxxxxxx]
Sent: Tuesday, April 30, 2013 4:12 PM
To: Ambrish Varma; ibis-macro@xxxxxxxxxxxxx
Subject: RE: [ibis-macro] Re: A cut and paste error in IBIS v5.1?
Ambrish:
I disagree with your editorial suggestion.
There may be other issues with the definitions of Value, Range, etc.,
but the existing definition is textually formatted in a way that is parallel
to
the other definitions -the argument(s) on the same line and the definition
under it.
Bob
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Ambrish Varma
Sent: Tuesday, April 30, 2013 12:00 PM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: A cut and paste error in IBIS v5.1?
Here's another one:
(Page 177)
Value <value>
Single value data. The user may assign any value without any restrictions
within the
constraints of the Type of the variable.
Should be:
Value <value> Single value data
Thanks,
Ambrish.
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Ross
Sent: Tuesday, April 30, 2013 2:47 PM
To: Arpad_Muranyi@xxxxxxxxxx; ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] Re: A cut and paste error in IBIS v5.1?
Arpad:
Good catch. That could be added to the list of typo corrections.
Bob
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad
Sent: Tuesday, April 30, 2013 11:32 AM
To: ibis-macro@xxxxxxxxxxxxx
Subject: [ibis-macro] A cut and paste error in IBIS v5.1?
I think I just found a fairly serious cut and paste error in IBIS v5.1 on
pg. 185.
Both GetWave_Exists and Use_Init_Output has the same exact sentence
for the Definition:
"Tells EDA tool whether the AMI_GetWave is implemented in this model"
While this is correct for the GetWave_Exists, it is quite wrong for
Use_Init_Output... I think this must be corrected for the next version
of the specification.
Thanks,
Arpad
==========================================================================
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
Other related posts:
