Ambrish, I am not sure why do you think that there must have been another BIRD to suggest this change. We went through a lot of discussions about the corrections that BIRD 127 proposed. I think this was just a result of one of those corrections. Thanks, Arpad =========================================================== -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Ambrish Varma Sent: Tuesday, April 30, 2013 3:27 PM To: Bob Ross; ibis-macro@xxxxxxxxxxxxx Subject: [ibis-macro] Re: A cut and paste error in IBIS v5.1? Bob, I didn't mean to suggest moving the text up or any such thing like that. I was simply objecting to the 'addition' of the following text in the spec " The user may assign any value without any restrictions within the constraints of the Type of the variable." The changes were invoked In BIRD 127.4 as reproduced below: On pg. 140 replace the following lines: | Format: (default is range) | Value <value> Single value data | Range <typ value> <min value> <max value> | List <typ value> <value> <value> <value> ... <value> with these lines: |* Format <data_format> <data>: |* |* Where Format is optional and <data_format> and <data> are required. |* <data_format> and <data> must be substituted with one of the following: |* Value <value> Single value data. Note that Value and Default |* (defined below) are mutually exclusive, and must not be used |* together for the same parameter. | Range <typ value> <min value> <max value> | List <typ value> <value> <value> <value> ... <value> So there must have been another BIRD to change the text. Can you or anyone else point me to that please? Thanks, Ambrish. -----Original Message----- From: Bob Ross [mailto:bob@xxxxxxxxxxxxx] Sent: Tuesday, April 30, 2013 4:12 PM To: Ambrish Varma; ibis-macro@xxxxxxxxxxxxx Subject: RE: [ibis-macro] Re: A cut and paste error in IBIS v5.1? Ambrish: I disagree with your editorial suggestion. There may be other issues with the definitions of Value, Range, etc., but the existing definition is textually formatted in a way that is parallel to the other definitions -the argument(s) on the same line and the definition under it. Bob -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Ambrish Varma Sent: Tuesday, April 30, 2013 12:00 PM To: ibis-macro@xxxxxxxxxxxxx Subject: [ibis-macro] Re: A cut and paste error in IBIS v5.1? Here's another one: (Page 177) Value <value> Single value data. The user may assign any value without any restrictions within the constraints of the Type of the variable. Should be: Value <value> Single value data Thanks, Ambrish. -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Ross Sent: Tuesday, April 30, 2013 2:47 PM To: Arpad_Muranyi@xxxxxxxxxx; ibis-macro@xxxxxxxxxxxxx Subject: [ibis-macro] Re: A cut and paste error in IBIS v5.1? Arpad: Good catch. That could be added to the list of typo corrections. Bob -----Original Message----- From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad Sent: Tuesday, April 30, 2013 11:32 AM To: ibis-macro@xxxxxxxxxxxxx Subject: [ibis-macro] A cut and paste error in IBIS v5.1? I think I just found a fairly serious cut and paste error in IBIS v5.1 on pg. 185. Both GetWave_Exists and Use_Init_Output has the same exact sentence for the Definition: "Tells EDA tool whether the AMI_GetWave is implemented in this model" While this is correct for the GetWave_Exists, it is quite wrong for Use_Init_Output... I think this must be corrected for the next version of the specification. Thanks, Arpad ========================================================================== --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe --------------------------------------------------------------------- IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/ IBIS Macro reflector: //www.freelists.org/list/ibis-macro To unsubscribe send an email: To: ibis-macro-request@xxxxxxxxxxxxx Subject: unsubscribe