[ibis-macro] Re: BIRD160 - parameters comments
- From: "Bob Ross" <bob@xxxxxxxxxxxxx>
- To: <Arpad_Muranyi@xxxxxxxxxx>, "'IBIS-ATM'" <ibis-macro@xxxxxxxxxxxxx>
- Date: Thu, 11 Apr 2013 12:54:33 -0700
Arpad:
I just noticed my mistake based on BIRD153.1.
The [Converter Parameters]/[End Converter Parameters] should be
[Begin Parameter Trees]/[End Parameter Trees]. I think the
details of BIRD153.1 needs to be decided before we vote on
BIRD160 and BIRD153.1.
Bob
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Muranyi, Arpad
Sent: Wednesday, April 10, 2013 8:06 PM
To: 'IBIS-ATM'
Subject: [ibis-macro] Re: BIRD160 - parameters comments
Bob,
Thanks again for your review. I found those "i. e."
occurrences with the space between them and fixed them
to be "i.e.,". I sent the fixed version to Mike L. to
be posted on the ATM website.
Regarding your (Usage In) comment in BIRD 153, we can
discuss that in a separate discussion, independently
from BIRD 160.1. The way BIRD 160.1 is written now is
clear that if BIRD 153 is rejected, we will make the
necessary (small) adjustments in what is proposed in
BIRD 160.1. It really does not have a major effect on
BIRD 160.1 whether it is approved or not.
Thanks,
Arpad
==========================================================
-----Original Message-----
From: Bob Ross [mailto:bob@xxxxxxxxxxxxx]
Sent: Wednesday, April 10, 2013 6:24 PM
To: Muranyi, Arpad; 'IBIS-ATM'
Subject: RE: [ibis-macro] Re: BIRD160 - parameters comments
Arpad:
This revision looks good enough to post. There are a lot of
details to review.
The i.e., is fixed. There are several places where you used i. e.
(with a space between i. and e. Replace i. e. with i.e.,
As a separate topic related to BIRD153, I do not like using
(Usage In) for defining parameters in the .ibs parameter tree.
It might be ok within a .ami file definition because the parameter is
sent to the .dll and also could be used as a .ibs symbolic parameter.
However, (Usage In) has a different meaning in BIRD153 and does
not mean that the parameter is sent to the .dll. For consistency
and to avoid confusion we should use (Usage Info) in BIRD160.
Bob
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
Other related posts:
