[python] Re: another newcomer
- From: Olaf Johansson <home@xxxxxxxxxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Wed, 24 Jan 2007 17:50:22 +0100
I guess on a larger wheel more rubber is envolved in the flexing than
on a smaller wheel.
But saying that a softer compound would give less rolling
resistance ... uh, uh. I am not yet willing to buy that. Anyone who
let out 20 psi from the bike's tyre will notice an increased amount
of sweat on their forehead.
olaf
On 24 jan 2007, at 14.14, dirk.bonne@xxxxxxx wrote:
Henry Thomas wrote:
dirk.bonne@xxxxxxx wrote:
FYI: there has been documented measurements related to this.
Check out
this pdf:
http://www.ligfiets.net/redactie/meetligfietsengels.pdf
Dirk
Dirk, thanks for sharing this with us, it was a very interesting
read. There isn't a lot of test data like this that I have found
which is specifically dealing with recumbent.
I am a bit confused about the tires. As I read it, larger rims
(26") and firmer rubber compounds are better at higher pressures
(110psi). However I thought that the Specialized Fat Boy was
softer than the Schwalbe Stelvio Kevlar, or is that not the case.
<moz-screenshot-1.jpg>
I read the opposite out of this paragraph and thus no
contradiction. The supple rubber compounds are better. The stelvio
material is stiffer and also has a worse performance.
What I think is interesting is that extreme height differences
between seat / BB are not needed. From 15 -> 25cm is no much
different in power. So you can just as well use 15cms (more
ergonomic). note, the measurement was made for seat angle of
21degrees.
Dirk
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
