ah ok. thanks for the clarification.
I guess I'm spoiled with the so-called "professional" version here.
At 12:59 PM 6/5/2016, you wrote:
You can if you are running Jaws Professional. However, if you are running
Jaws home then there are limitations with regard to how far back you can go
on a 64 bit OS.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Chris Smart
Sent: 05 June 2016 16:38
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: AW: Re: AW: Re: AW: Re: OOT: Mackie Surface Reader
Ben, If you are authorized for Jaws 16, you can
certainly run 15 or earlier on the same system. I have 14 and 16 here.
Chris
At 04:16 PM 6/4/2016, you wrote:
>Hi Phil
>Great, thanks a lot, also for your updating advice.
>Since I updated Jaws from about 9.0 to 16.0 a
>year ago I think I'm out of luck for having
>speech feedback with jaws 15. But somehow I'm
>just happy that there is a simple and
>explainable reason for all this and my system
>isn't that extraordinary or deranged as I
>thought. So I think I just wait and hope tim can
>fix the speech issue for newer jaws versions.
>
>All the best
>Ben
>
>--
>Benjamin Blatter
>Grütstrasse 6c
>8625 Gossau/ZH
>Telefon: +41 (0) 79 505 00 15
>E-Mail: info@xxxxxxxxxxxxxxxxxx
>
>-----Ursprüngliche Nachricht-----
>Von: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] Im Auftrag von Phil Muir
>Gesendet: Samstag, 4. Juni 2016 21:29
>An: ddots-l@xxxxxxxxxxxxx
>Betreff: [ddots-l] Re: AW: Re: AW: Re: OOT: Mackie Surface Reader
>
>Hey Ben. You are very welcome! Always happy to
>help out if I can :-) Sorry to say that you
>won't get any spoken feedback from Surface
>Reader currently under Jaws 16 as something has
>changed in Jaws 16 and Tim hasn't had time to
>debug the issue yet. What you could do though is uninstall Jaws
>16 then install Jaws 15 and 16 again. In other
>words, if you are running Jaws 15 or below then,
>you will get spoken feedback from Surface Reader.
>Also, if you register Samplitude E.G. extend the
>trial for a month then you can download a patch
>and patch it up to version 13.1.3.176
>(DC2). Don't just updated it though. Download
>the patch from the Magix download centre.
>If you automatically update it then you will be
>running a later version of Samplitude however,
>that patch has some issues where by some strange
>characters are spoken in edit fields etc. BTW,
>Magix are aware of the issue and it's been
>prioritised for a fix. Finally, running
>Samplitude Pro X2 suite here and I must say hats
>off to Steve Spamer and Tim Burgess for the Jaws
>scripts and HSC solution. It really is very
>stable. Just working out a few final issues
>before these come out of beta then you can all use them.
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of info@xxxxxxxxxxxxxxxxxx
>Sent: 04 June 2016 20:09
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] AW: Re: AW: Re: OOT: Mackie Surface Reader
>
>Phil,
>Thanks for your message and your suptle hints what a proper user should do
...
>I probably didn't restart my PC after installing
>the LoopBe30 Midi cables or after installing
>surface reader. Now after I just did this I dare
>to say, that it almost is working. The faders
>are moving when I create a new Project in
>Samplitude. but I don't hear any speech when I
>press par example the buttons for selecting or arming tracks on my mackie.
>In the surface reader there is a voice menu
>where one can mute speech. but It's not checked,
>so I should hear something, right?
>
>Just for the record: I've got Jaws 16.0 on a
>Swiss German Windows 7 Professional 64-bit
>system. Samplitude is Pro X2 Suite 13.1.0.131 (DC2), Trial version.
>First I turn my pc on, then the mackie MCu Pro
>control surface, after this I open the surface
>reader, ant last comes Samplitude.
>
>Ben
>
>-----Ursprüngliche Nachricht-----
>Von: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] Im Auftrag von Phil Muir
>Gesendet: Samstag, 4. Juni 2016 19:11
>An: ddots-l@xxxxxxxxxxxxx
>Betreff: [ddots-l] Re: AW: Re: OOT: Mackie Surface Reader
>
>Some questions. Which version of Jaws are you
>running this with and which version of
>Samplitude? When you start your computer, do
>you first open Surface reader and make sure the surface is working ok?
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of info@xxxxxxxxxxxxxxxxxx
>Sent: 04 June 2016 18:06
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] AW: Re: OOT: Mackie Surface Reader
>
>Hi Chris
>
>Thanks a lot, this was very helpful and should
>indeed be included in the manual ... However I
>think I have some problems caused by my Mackie
>unit or probably Surface reader. Sometimes I'm
>getting the error message: Couldn't open Mackie
>MCU Pro USB 3.1, which I think refers to the
>physical port. And when I start Samplitude I'm
>getting a caught unhandled error exception
>message. I think I'll write to Tim at raised
>bar, hopefully I can get it work like you.
>And yes, I really was able to replace the BCF
>2000 with Mackie MCU Pro in my head, *grin*
>
>Thanks again for your help and kind regards Ben
>
>
>-----Ursprüngliche Nachricht-----
>Von: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] Im Auftrag von Chris Smart
>Gesendet: Samstag, 4. Juni 2016 16:46
>An: ddots-l@xxxxxxxxxxxxx
>Betreff: [ddots-l] Re: OOT: Mackie Surface Reader
>
>Hi Ben,
>
>I use a free utility called LoopMIDI. The
>following instructions are for a BCF2000,
>LoopMIDI, Surface Reader, and sonar. So, you may
>need to modify the instructions slightly. Where
>it says BCF2000, think Mackie Control. (grin)
>
>I got the following help from Rui Vilarinho
><ruialby@xxxxxxxxxxx> I think it should be added
>to the Surface Reader documentation, as this
>whole virtual ports thing seems to be a bit of a
>head-scratcher for us. It sure was for me! I've
>edited it some for clarity, but feel free to
>change anything if you think it would be easier for people to follow.
>
>Using the BCF2000, Surface Reader, and your DAW:
>
>You need three things installed and working.
>
>First, grab a copy of LoopMIDI from
>http://www.tobias-erichsen.de/software/loopmidi.html
>and install it. This is used to set up two
>virtual MIDI ports. As it says on the page, the
>ports are only active as long as LoopMIDI is
>running - note that closing its window minimizes
>it to the System Tray but it remains
>active. You also have the option to have LoopMIDI run at Windows log on.
>
>Second, you need to have the BCF2000 plugged in,
>turned on, and in Mackie emulation mode.
>
>Third, you need to have Surface reader installed. It's available from:
>http://www.raisedbar.co.uk/surfacereader/surfacereader.htm
>
>In the Setup tab of LoopMIDI, make sure you have two virtual ports listed.
>Add them with the plus and minus buttons if
>necessary. LoopMIDI will probably default to
>numbering these 0 and 1, but you can change
>their names to 1 and 2. Name them anything you wish.
>
>If you have already configured your DAW to work
>with the BCF2000, you need to tell your DAW to
>use the virtual ports, not the physical ones on
>the BCF2000. With 2 virtual MIDI ports defined
>in LoopMIDI, go to your DAW and disable the BCF
>2000 MIDI device input and output assignments.
>Instead, select your first Virtual MIDI port as
>input and the second virtual MIDI port as output.
>
>Configure Surface Reader with the following settings.
>In Hardware Properties:
>Set input to BCF2000 port 1.
>Set output to your first virtual midi port.
>
>In Display Properties:
>Set Input to your second virtual midi port.
>Set Output to BCF2000 port 1.
>
> NOTE: The above assumes you are using the
> BCF2000's USB port for MIDI communication,
> meaning both port numbers are the same. If,
> however, you are using the MIDI in and out
> jacks on the BCF2000, you will have distinct names for input and output.
>
>At 09:26 AM 6/4/2016, you wrote:
> >Hi all
> >
> >If someone out there has experience with the surface reader from raised
> >bar: I'm trying to set this up for my Mackie MCU Pro with Sonar and
> >Samplitude. I purchased the virtual Midi Cables LoopBe30.
> >But now I'm stuck. I'm not sure how these virtual cables must be
> >connected. The Help Tutorial in Surface Reader sadly doesn't give any
> >examples for LoopBe30.
> >So, if anyone got it working and is willing to give me some pointers
> >(probably off list) I'd be very grateful.
> >
> >Kind regards
> >Ben
> >
>
>---
><http://www.shareasale.com/r.cfm?b=635671&u=1109457&m=54749&urllink=&afftra
c>k=>Learn
>to meditate and train your brain with Muse, the
>first lab-grade EEG biofeedback headband for home use!
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>send a message, to ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type faq
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send
>a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
faq
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send
>a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
faq
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send
>a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
faq
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send
>a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
faq
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>send a message, to
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>faq
"There are two means of refuge from the miseries
of life: music and cats." - Albert Schweitzer
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
