LOL Thanks for that DJX. I suspected that was the case, but wasn't sure.
At 02:47 AM 6/26/2016, you wrote:
Hi, the reason you are getting that message has nothing to do with viruses
or the file being infected. Smart Screen filter is not an antivirus program,
what it does is it sends the file and URL to MS that you are downloading,
and it checks to see if anybody has reported that file as infectious or a
virus, or it otherwise check if the file is a popular/recognized download
from a popular site. Seeing how that file has probably not been downloaded
often enough to be considered safe on their end, that would explain why SSF
is flagging it and blocking it. You should be able to bypass that block, or
temporarily turn off Smart Screen Filter.
Believe me, and if you work with security software you should know this,
screen filter is not any kind of active antivirus program or plug-in. Most
people disable it anyways, since it's just another way for MS to keep tabs
on people and see what is being downloaded and from what sites, to offer up
ads, especially now that ads are offered up throughout the windows 10
ecosystem.
The only other reason you'd be getting that error would be for invalid
certificate reasons, since as of 2016 MS has new rules and types of
certificates, and any executables or MSI packages you download will be check
for valid certificates. But seeing how this is a .zip file, it wouldn't be
applicable to this file type anyway.
HTH, DJX
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Ray Dunmeyer rxd.incrxd
Sent: Saturday, June 25, 2016 3:51 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Behringer BCF2000 control surface installation with
sonar
Hi Chris, I got the below message while trying to download:
Behringer BCF2000 Stuff.zip is unsafe to download and was blocked by
SmartScreen Filter.
Does this download have a potential virus?
Ray.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Chris Smart
Sent: Saturday, June 25, 2016 3:02 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Behringer BCF2000 control surface installation with
sonar
Hi Ray.
Grab this zip file, Behringer BCF2000 Stuff.zip from this download link:
https://www.sendspace.com/pro/dl/al1axs
Inside, you'll want to start by reading the
BCF2000 by Feel, a guide a bunch of us put together a few years back. It's
in htm and rtf formats. That will get you going in Sonar, and then some!
Also included are:
1. the installer for Tim Burgess's Surface Reader application, 2. Loop
Midi, 3. Surface Reader and LoopMIDI Setup Instructions.txt 4. the latest
BCF2000 64-bit driver, and 5. The firmware update utility in case you need
to flash your unit.
Chris
At 01:45 PM 6/25/2016, you wrote:
>Hi all, I have a Behringer BCF2000 control surface that I want to use
>with Sonar, but it did not come with any documentation. Can I just plug
>it in and start using it or are there some setup steps I have to
>perform
first?
>
>If anyone else ever had or has the Behringer BCF2000 control surface
>can you tell me how you got it setup and how you use it? Where can I
>find the manuals?
>
>Thanks for any help!
>
>OS: Windows 7 64bit
>
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Judy Redlich
>Sent: Saturday, June 25, 2016 12:38 PM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Changing Pitch of Purchased Performance Track
>with Sonar 8.5?
>
>Great. I'll try it in SF. Thanks.
>
>
>Judy
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart
>Sent: Saturday, June 25, 2016 10:28 AM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Changing Pitch of Purchased Performance Track
>with Sonar 8.5?
>
>yep.
>
>At 12:34 AM 6/25/2016, you wrote:
> >Would either Subscribe or Amazing Slow down work if I have a bunch of
> >dictation for folks to type things into the computer from?
> >-----Original Message-----
> >From: ddots-l-bounce@xxxxxxxxxxxxx
> >[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Smart
> >Sent: Friday, June 24, 2016 1:06 PM
> >To: ddots-l@xxxxxxxxxxxxx
> >Subject: [ddots-l] Re: Changing Pitch of Purchased Performance Track
> >with Sonar 8.5?
> >
> >try Transcribe, from Seventh-string Software. or Amazing Slowdowner...
> >if you have an iPhone, there are many apps which can slow down music
> >without changing the pitch, loop sections, etc.
> >Search app reviews at www.applevis.com for those.
> >
> >At 01:32 PM 6/24/2016, you wrote:
> > >I am doing something similar. I do not need to change the pitch.
> > >I was trying to import an MP3 recording into the Music Bed track in
> > >the AAA Audio Voiceover template so I could slow down one section
> > >to attempt to pick out notes that pass by too quickly for me to
> > >pick
up.
> > >I have
> > >16 GB in my computer and have tried it in Sonar both 32-bit and
> > >64-bit, both resulting in a message of, "Out of memory."
> > >
> > >
> > >-----Original Message-----
> > >From: ddots-l-bounce@xxxxxxxxxxxxx
> > >[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of DJX
> > >Sent: Tuesday, June 21, 2016 1:21 PM
> > >To: ddots-l@xxxxxxxxxxxxx
> > >Subject: [ddots-l] Re: Changing Pitch of Purchased Performance
> > >Track with Sonar 8.5?
> > >
> > >You'd have to acidize the whole thing, and then use the clip transpose.
> > >However, note that the pitched version will not sound like the
> > >original. Depending how far up or down you have to transpose, you
> > >will introduce artifacts into the sound as you go up or down.
> > >You might be able to get away with half to a whole step up or down,
> > >but it all depends on the recording, how it was recorded,
> > >instrumentation of the track etc.
> > >
> > >HTH, DJX
> > >
> > >-----Original Message-----
> > >From: ddots-l-bounce@xxxxxxxxxxxxx
> > >[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dani Pagador
> > >Sent: Tuesday, June 21, 2016 2:16 PM
> > >To: ddots-l@xxxxxxxxxxxxx
> > >Subject: [ddots-l] Changing Pitch of Purchased Performance Track
> > >with Sonar 8.5?
> > >
> > >Hi, Everyone.
> > >I want to purchase a backing track, but I need to change the key to
> > >suit my range. How can I do this with Sonar 8.5?
> > >
> > >Thanks,
> > >Dani
> > >PLEASE READ THIS FOOTER AT LEAST ONCE!
> > >To leave the list, click on the immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >If this link doesn't work then send a message to:
> > >ddots-l-request@xxxxxxxxxxxxx
> > >and in the Subject line type
> > >unsubscribe
> > >For other list commands such as vacation mode, click on the
> > >immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> > >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
> > >
> > >
> > >PLEASE READ THIS FOOTER AT LEAST ONCE!
> > >To leave the list, click on the immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> > >If this link doesn't work then send a message to:
> > >ddots-l-request@xxxxxxxxxxxxx
> > >and in the Subject line type
> > >unsubscribe
> > >For other list commands such as vacation mode, click on the
> > >immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subject q or send a message, to
> > >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
> >faq
> > >
> > >
> > >PLEASE READ THIS FOOTER AT LEAST ONCE!
> > >To leave the list, click on the immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
> > >If this link doesn't work then send a message to:
> > >ddots-l-request@xxxxxxxxxxxxx
> > >and in the Subject line type
> > >unsubscribe
> > >For other list commands such as vacation mode, click on the
> > >immediately following link:
> > >ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
> > >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
> >
> >
> >
> >----------------------------------------
> >"There are two means of refuge from the miseries of life: music and
> >cats." - Albert Schweitzer
> >
> >PLEASE READ THIS FOOTER AT LEAST ONCE!
> >To leave the list, click on the immediately following link:
> >ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> >If this link doesn't work then send a message to:
> >ddots-l-request@xxxxxxxxxxxxx
> >and in the Subject line type
> >unsubscribe
> >For other list commands such as vacation mode, click on the
> >immediately following link:
> >ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
> >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
> >
> >PLEASE READ THIS FOOTER AT LEAST ONCE!
> >To leave the list, click on the immediately following link:
> >ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
> >If this link doesn't work then send a message to:
> >ddots-l-request@xxxxxxxxxxxxx
> >and in the Subject line type
> >unsubscribe
> >For other list commands such as vacation mode, click on the
> >immediately following link:
> >ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
> >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
>
>----------------------------------------
>"There are two means of refuge from the miseries of life: music and
>cats." - Albert Schweitzer
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode, click on the immediately
>following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode, click on the immediately
>following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode, click on the immediately
>following link:
>ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
----------------------------------------
"There are two means of refuge from the miseries of life: music and cats." -
Albert Schweitzer
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
