[ddots-l] Re: M-Audio Axiom 49 help.
- From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 11 May 2009 06:48:44 -0400
Well I don't think a factory reset is the issue. But, if you want to reset
the Axiom, press the bottom left and bottom right buttons on the numeric key
pad over on the left (at the same time) then turn the Axiom off (at the
back) then turn it back on (with the 2 buttons still being held down for 10
seconds and then let go). The Axiom will then be reset to factory settings.
Since Dancing Dots is selling this midi controller and calling it
"accessible", I think it would be nice if there was a tutorial on how to set
it up to its full potential. I've had one for a year and a half and
basically gave up on assigning knobs and faders to effects etc. etc. and
just use it as a very basic midi controller.
I'd have no problem paying for an M-Audio Axiom lesson or tutorial if it was
made with the Sonar user in mind and especially if it was geared for CT
users!
Stacy
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Monday, May 11, 2009 4:59 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Axiom 49 help.
Hmm, may be worth trying a factory reset on the unit before using it.
Regards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: "John Schucker" <gwynn@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, May 11, 2009 4:56 AM
Subject: [ddots-l] Re: Axiom 49 help.
> Upon further investigation, more weirdness. I load sonar, open an
> existing project. I hit play on the axiom, nothing. So I hit recall
> 20. Transport controls now work, but instead of each slider
> controlling a track volume, one controls what appears to be the master
> bus volume and another controls the volume of the one effect I have
running.
> Similarly, two of the knobs pan the master bus and the effect. The
> rest seem to do nothing. The standard sonar preset has the sliders as
> volumes for tracks 1-8 and the knobs as pan controls for 1-8 as well.
> At least that's what "m-audio axiom 49 preset 20" does.
>
> At this point I'm thinking an act issue of some sort rather than the
> axiom, because the axiom controls work just fine. In fact they should
> be sending the right messages since they control volumes and pans,
> just not the ones I'm expecting. Plus the transport controls are working.
> Anybody have any tips? A good explanation of how to use act? I'll be
> registering and possibly calling M-audio as well, following on that
> whole letting vendors know idea posted here a few months ago. But
> considering I baffle the hell out of the jaws support people every
> single time I get in contact with them and it's about their own
> software, eh, I'll stick with at least asking here first, heh.
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
