I took a look at the cakewalk control surface last week. Yeah, it looks nice and solid, and having the dedicated act controls is great, but even the surface by itself without the audio interface/preamp component is still retailing for something like $2400.
GOrd----- Original Message ----- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, May 11, 2009 11:57 AM Subject: [ddots-l] Re: M-Audio Axiom 49 help. Warning warning warning! If you reset your Axiom with this procedure, you will completely empty out its preset memory! The only way to restore the presets is with the M-Audio software, which isn't particularly accessible. This *is* a very accessible controller. Suppose you want a knob to control MIDI pan. 1. Press the control set button (top row, second from the right, I think). 2. Move the knob you'd like to assign. 3. Type 10 on the keypad (this means MIDI CC message 10). You're done. Granted, you still need to know a little something about MIDI CC messages, and which ones your synths and plug ins will respond to, but you need to know that for many controllers. The difference with the Axiom is that you don't need to use a dial and two buttons, or inaccessible PC software, to remap the controls. That actually makes it possible for you to map the controls, though I didn't say that working with controllers would be simplistic. To really work in Sonar with a controller, you need to be able to use ACT. However, my current opinion about ACT is that it is a great concept with practically no ready-to-go implementation on controllers. It isn't reasonable for Cakewalk to expect that novice users will have the time to map their MIDI controller's controls to ACT controls, and then go through all of their plug ins and map the plug in's controls to ACT controls. That takes a lot of time. Cakewalk does this for you on some gear, like the V-Studio 700C control surface, but that is more money than most people on this list are willing to spend. Bryan -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Stacy Bleeks Sent: Monday, May 11, 2009 6:49 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: M-Audio Axiom 49 help. Well I don't think a factory reset is the issue. But, if you want to reset the Axiom, press the bottom left and bottom right buttons on the numeric key pad over on the left (at the same time) then turn the Axiom off (at the back) then turn it back on (with the 2 buttons still being held down for 10 seconds and then let go). The Axiom will then be reset to factory settings. Since Dancing Dots is selling this midi controller and calling it "accessible", I think it would be nice if there was a tutorial on how to set it up to its full potential. I've had one for a year and a half and basically gave up on assigning knobs and faders to effects etc. etc. and just use it as a very basic midi controller. I'd have no problem paying for an M-Audio Axiom lesson or tutorial if it was made with the Sonar user in mind and especially if it was geared for CT users! Stacy -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir Sent: Monday, May 11, 2009 4:59 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Axiom 49 help. Hmm, may be worth trying a factory reset on the unit before using it. Regards, Phil Muir P J Muir Productions, Music And Audio Production Telephone: US (615) 713-2021 UK+44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxx URL: www.philmuir.com/ ----- Original Message ----- From: "John Schucker" <gwynn@xxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, May 11, 2009 4:56 AM Subject: [ddots-l] Re: Axiom 49 help.
Upon further investigation, more weirdness. I load sonar, open an existing project. I hit play on the axiom, nothing. So I hit recall 20. Transport controls now work, but instead of each slider controlling a track volume, one controls what appears to be the master
bus volume and another controls the volume of the one effect I have
running.
Similarly, two of the knobs pan the master bus and the effect. The rest seem to do nothing. The standard sonar preset has the sliders as
volumes for tracks 1-8 and the knobs as pan controls for 1-8 as well. At least that's what "m-audio axiom 49 preset 20" does. At this point I'm thinking an act issue of some sort rather than the axiom, because the axiom controls work just fine. In fact they should
be sending the right messages since they control volumes and pans, just not the ones I'm expecting. Plus the transport controls are
working.
Anybody have any tips? A good explanation of how to use act? I'll be
registering and possibly calling M-audio as well, following on that whole letting vendors know idea posted here a few months ago. But considering I baffle the hell out of the jaws support people every single time I get in contact with them and it's about their own software, eh, I'll stick with at least asking here first, heh. PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq
