Yes. What you'll do is assign the Phantom to port 1 in Soanr's MIDi
devices dialog. You'll assign the other module to port 2. Those are
both outputs. You'll also assign the MIDi in of the Phamtom to MIDI in
1. Now. When you want a sound from the XP whatever, you go to port 2
channel 1-16, bank whatever, patch whatever and it plays. When you
want
somethignf rom the phamtom you go to port 1, channel whatever, bank
whatever, patch whatever and it plays.
Kevin
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Omar Binno
Sent: Monday, September 04, 2006 12:39 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: couple questions
Actually, I'll give a more detailed description of my setup, because
I'm
not following why you mentioned changing wires and what not. I'm
running
my Fantom X keyboard via USB to the comp and am using Sonar to sequence
with the Fantom sounds. I just picked up a Roland XV5080 Module, and
will access its sounds by midiing it through the Fantom. With this type
of setup, will I still need a midi interface?
On 9/4/06, Omar Binno <omarbinno@xxxxxxxxx> wrote:
Hi Phil:
One is only a module, and needs to be accessed through the other
keyboard. That's why I was wondering if I actually need an interface
if I'm using the keyboard with the comp, and just accessing the module
through the keyboard.
Omar Binno
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 3:10 PM
Subject: [ddots-l] Re: couple questions
May be best to get a MIDI interface as you can then have both
keyboards connected to the PC at the same time, and you won't have to
unplug and replug anything. Pre-amps are hardware. You would usually
plug microphones into them and obviously, can be used ether with PC's
or, Mac's.
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, September 04, 2006 5:22 PM
Subject: [ddots-l] couple questions
Hello All:
I have a question about a setup, and another one about recording.
1. I'm using a Roland Fantom X keyboard via USB with Sonar. I just
picked up a roland xv5080 module and want to access and play its
sounds through my Fantom. Can I still keep the Fantom connected to the
comp via USB and access the xv5080's sounds through Sonar if i have it
running via midi through the Fantom, or am I going to have to buy a
midi interface and run both devices through that?
2. Often times, I hear people who use a Mac to record their stuff
say that they run their material through a pre amp to get the material
sounding fatter, (especially the kick.) Are pre amps also accessible
for pc users, or do we have something similar and comporable?
Thanks for all help.
Omar Binno
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
