Steve,
I think having Sonar as the master is probably your best bet. There's
good
stuff in the Help system. Here's a sequence of actions to perform in
Sonar's Help to get you to the topics you need:
1 - Open Sonar Help;
2 - Press S until you get to "Synchronising Your Gear", then press the
right
arrow to expand it;
3 - Arrow down and you'll get "synchronisation Overview", so press Enter
on
it, followed by F6 and you'll be able to read the topic;
4 - Press Alt+C to get back to the table of contents;
5 - Press the down arrow to get to the next topic - there's quite a few in
this section of the Help and they're all worth a read if you're going to
get
a handle on this and there's quite a few step-by-step examples.
Let me know how you get on and if I can help clarify anything you don't
understand.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Steve Wicketts
Sent: 12 May 2009 23:19
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: still having problems making sonar my Sequencer
slave
Hi Tim,
I can access Sync Mode, MIDI Time Clock and the control midi in, on the
Sequencer.
I've set up all the necessary MIDI Channels in Sonar and when I pressed
play
on the sequencer all the MIDI Channels and corresponding sounds perform
perfectly.
After I'd check that they all worked, I set the sync mode and control midi
in on the sequencer and hit record on the sonar, but nothing happened.
Maybe it would be easier if Sonar was the Slave? Tim, which would you
advise.
Steve W
Iwww.jerryleelewis.co.uk
----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, May 12, 2009 10:32 PM
Subject: [ddots-l] Re: still having problems making sonar my Sequencer
slave
Hi Steve,
Do you know if your sequencer is set up to be either the master or the
slave
device? You can't get very far if you don't know the answer to this
question, but I should be able to help further if you can let me know the
answer.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Steve Wicketts
Sent: 12 May 2009 21:02
To: ddtots
Subject: [ddots-l] still having problems making sonar my Sequencer slave
Hi All,
I never thought this would be so tricky for me.
I just want to put some tracks from my hardware sequencer on to Sonar.
Mike Christer advice wisely to look in Options menu, as there's info
about
midi but I couldn't find midi sync or MTC.
I'm not able to access the help files as when I press enter on a topic
nothing happens.
I think the help files need me to have internet access which I haven't
got
in my little studio room.
I tried a external floppy drive (as that seemed like a good idea from
Omar)
but unfortunately sonar isn't even recognising that the discs are even
formatted.
If I could only find the midi Sync, midi time clock page, I may be able
to
put these sequencer tracks on to the sonar.
Please! can anyone help.
Steve W
www.jerryleelewis.co.uk
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
