[duxuser] extra form feeds
- From: "Janet Reynolds" <JReynolds@xxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Fri, 19 Aug 2005 16:10:11 +1200
Has anyone come across this one before? We have just upgraded the PC
that is used as a printserver in our embosser room. Now, when a Duxbury
job is sent from any PC on the network to any of the embossers, we get
two and a half form feeds at the end of the job. The printserver PC is
XP and the driver is set up as Generic/Text only as before. It's
interesting that if you send the job from DBT on the printserver PC
itself, you don't get the extra form feeds if you point Duxbury at LPT1,
but you do if you point it at the network address of the embosser. The
network uses the standard TCPIP protocol and our network support folk
can't think of anything in there to cause this effect. We could live
with one or two form feeds but it's the half that is the killer!
Janet
Other related posts:
