[ddots-l] Re: Reading Bus Input Meter?
- From: "Phil Muir" <ddots@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 19 May 2009 20:07:47 +0100
No, just output metres.
Regards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: Chi Kim
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, May 19, 2009 5:31 PM
Subject: [ddots-l] Re: Reading Bus Input Meter?
Oh, there is no input meter on bus?
Chi
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, May 19, 2009 12:22 PM
Subject: [ddots-l] Re: Reading Bus Input Meter?
Not aware of any input metres on Sonar's buses.
Regards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: Chi Kim
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, May 19, 2009 4:11 PM
Subject: [ddots-l] Re: Reading Bus Input Meter?
Hi Jean,
Yes, I was so busy finishing graduat school. I checked my email for the
list, and there were 4500 emails for me to read...
Anyways, I have to insert the Sonytus compressor and press f2 inside the
compressor window, not from the bus strip, right?
It'd be so much better if CT can read both input and output meter of bus.
Chi
----- Original Message -----
From: Studio Montebello
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, May 19, 2009 10:59 AM
Subject: [ddots-l] Re: Reading Bus Input Meter?
Hi Chee!
Nice to hear from you, it's been a while.
Although I've never tried this, insert a Sonytus compressor on your bus
, then you can read the input levels with the F2 key.
HTH, Jean
Visitez mon site / Visit my site at http://www.studiomontebello.com
----- Original Message -----
From: Chi Kim
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, May 19, 2009 9:19 AM
Subject: [ddots-l] Reading Bus Input Meter?
CT reports bus output meter, but is there way to read bus input meter
to see how hard I'm driving the bus? If there's a limiter on a bus, I won't
know if I'm clipping the bus or not since the output meter will be always below
0.
Thanks,
Chi
Other related posts:
