Hi Chris. Welcome back! Mine goes down to 64 but the audio crackles big time. I compromise at 128 at 44100. That gives me a round trip of 8 ms. I don't know how others are getting even less. Perhaps the more expensive cards make a difference here.
BTW, the loop back feature is easy if you have Sound Forge and I know you do. Just choose it in your settings within the program and then select it in the Saffire Mix Control pannel.
Bob.----- Original Message ----- From: "Chris Smart" <csmart8@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, May 28, 2011 9:44 PM Subject: [ddots-l] Re: focusrite audio card
I just got back from a 12-day trip to England. Anyway, with my Pro14, the lowest buffer setting I have available is 128 when sampling rate is 96K, 64 when it is set to 44.1. Despite what others have said, I do not see lower settings when I change the Firewire Latency parameter. Is this a difference between the Pro14 and other units in the line? Chris At 11:48 AM 5/19/2011, you wrote:You might be able to reduce that round-trip time further by adjusting the firewire buffer settings within the control panel software itself (this has to be done when you donâ?Tt have your client software loaded).PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.comVersion: 8.5.449 / Virus Database: 271.1.1/3667 - Release Date: 05/29/11 06:34:00
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq