[ddots-l] Re: focusrite audio card
- From: D!J!X! <megamansuperior@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 1 Jun 2011 15:20:52 -0400
Yea, it use to be regular list views, not you have to check and uncheck,
because you can have multiple inputs, since you can do more than 2 channels.
I think inputs 19/20 are the loopback ports (or the last 2 ins for smaller
cards). But I also think you have to select the loopback routing preset from
the control panel.
HTH, D!J!X!
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Chris Smart
Sent: Wednesday, June 01, 2011 2:12 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: focusrite audio card
At 12:13 PM 6/1/2011, you wrote:
>Hey don't forget for sf10, in the audio devices page, we have to
>use the mouse cursor after selecting the recording tab. Also make
>sure the microsoft sound mapper is not selected. I usually have to
>use the scroll down arrow to get all the inputs/outputs to display.
Thanks DJX, that's what I was getting at. I guess it's a little
easier in SF9.
chris
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
_____
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1321 / Virus Database: 1509/3665 - Release Date: 05/28/11
Other related posts:
