[ddots-l] Re: focusrite audio card
- From: "Bob Reid" <info@xxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 19 May 2011 12:13:31 -0400
Woops, I forgot to make clear that I'm happy with the 8MS round trip because it
allows me to do everything I need to do. Now it's just the loop back thing.
Bob.
----- Original Message -----
From: Bob Reid
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, May 19, 2011 12:12 PM
Subject: [ddots-l] Re: focusrite audio card
Hi Tim. Thanks very much. That's what I did. It actually goes down to 64
on my system but then my audio crackles.
Bob.
----- Original Message -----
From: Tim Burgess
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, May 19, 2011 11:48 AM
Subject: [ddots-l] Re: focusrite audio card
Hi,
Of the hot spot that activates the relevant menu, but think it’s just
called Settings.
You might be able to reduce that round-trip time further by adjusting the
firewire buffer settings within the control panel software itself (this has to
be done when you don’t have your client software loaded). Not at my audio
machine at the moment, so can’t remember the name
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Bob Reid
Sent: 19 May 2011 15:37
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: focusrite audio card
Hi Tim. Thank you for responding to this one. For those of you who have
read my other recent posts, I now have everything working as well as it can
with a Sonar audio round trip of 8MS at 128. Anything smaller crackles the
audio but the latency problems are gone!
Anyway, I have noticed that the Saffire Pro-14 only gives you the
option of microphone in the Windows 7 recording levels. I assume that
everything else should be set using Mix Control. Whenever I try the loop back
routing preset, I get silence.
Bob.
----- Original Message -----
From: Tim Burgess
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, May 19, 2011 3:27 AM
Subject: [ddots-l] Re: focusrite audio card
Hi, take a look at the Loopback port – it’s described in the manual and
works well.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Michael C
Sent: 19 May 2011 05:18
To: ddots-l@xxxxxxxxxxxxxxxx
Subject: [ddots-l] focusrite audio card
Hi every one hope all of you are on this fine morning.
I tried several attemps and presets to get m focusrite card to capture
audio from the internet, and I can’t seem to get it to work.
In the past I was able to select the mix input on the roland sound cards,
and capture audio from lets say youtube, etc.
How is this acheeved with the focusrite 40 pro?
Any help would be greatly appreciated.
--------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3647 - Release Date: 05/19/11
06:34:00
----------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3647 - Release Date: 05/19/11
06:34:00
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3647 - Release Date: 05/19/11
06:34:00
Other related posts:
