Hi Tim. Thanks very much. That's what I did. It actually goes down to 64 on my system but then my audio crackles. Bob. ----- Original Message ----- From: Tim Burgess To: ddots-l@xxxxxxxxxxxxx Sent: Thursday, May 19, 2011 11:48 AM Subject: [ddots-l] Re: focusrite audio card Hi, Of the hot spot that activates the relevant menu, but think it’s just called Settings. You might be able to reduce that round-trip time further by adjusting the firewire buffer settings within the control panel software itself (this has to be done when you don’t have your client software loaded). Not at my audio machine at the moment, so can’t remember the name Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Reid Sent: 19 May 2011 15:37 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: focusrite audio card Hi Tim. Thank you for responding to this one. For those of you who have read my other recent posts, I now have everything working as well as it can with a Sonar audio round trip of 8MS at 128. Anything smaller crackles the audio but the latency problems are gone! Anyway, I have noticed that the Saffire Pro-14 only gives you the option of microphone in the Windows 7 recording levels. I assume that everything else should be set using Mix Control. Whenever I try the loop back routing preset, I get silence. Bob. ----- Original Message ----- From: Tim Burgess To: ddots-l@xxxxxxxxxxxxx Sent: Thursday, May 19, 2011 3:27 AM Subject: [ddots-l] Re: focusrite audio card Hi, take a look at the Loopback port – it’s described in the manual and works well. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Michael C Sent: 19 May 2011 05:18 To: ddots-l@xxxxxxxxxxxxxxxx Subject: [ddots-l] focusrite audio card Hi every one hope all of you are on this fine morning. I tried several attemps and presets to get m focusrite card to capture audio from the internet, and I can’t seem to get it to work. In the past I was able to select the mix input on the roland sound cards, and capture audio from lets say youtube, etc. How is this acheeved with the focusrite 40 pro? Any help would be greatly appreciated. ---------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.449 / Virus Database: 271.1.1/3647 - Release Date: 05/19/11 06:34:00 ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.449 / Virus Database: 271.1.1/3647 - Release Date: 05/19/11 06:34:00