[duxuser] Setting up more than one embosser
- From: "Kathy Riessen" <kathy.riessen@xxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Fri, 10 Feb 2006 09:29:12 +1030
We have just moved onto Duxbury from Megadots and as such purchased Duxbury
10.5
We have 2 embossers which are connected to our system and each is used as
often as the other, depending on the type of material being produced.
My dilemma is:
When trying to set up the Global Embossers I can have both embossers listed
as Brailler Devices, but seem to be able to only set the Desired Braille
Document Formatting on one of them - this one becoming the embosser of
choice for new documents. As soon as I try changing the settings on another
one, that one reverts back to the suggested settings which are nothing like
we use.
This means that everytime I want to select the other embosser in my Document
Setup, I have to manually put in the Desired Document Formatting for that
embosser.
Can I globally set up more than one embosser with our Standard Parameters,
so that I can then select either one in the Document Setup without having to
check whether or not the line width, number of lines, top margin etc are
correct.
Kathy
--------------------------------------------------------------
Kathy Riessen, Braille Production Coordinator
South Australian School for Vision Impaired
1B Duncan Avenue, Park Holme, SA 5043
Tel: 8277 5255, Fax: 8277 5051
Other related posts:
