MessageWould like to hear suggestions also. This has just happened to me too! And I am having a dickens of a time making it stick. I am tempted to return to the old one just to avoid the headache. Every second counts this year in getting these materials out and fast! Denise ----- Original Message ----- From: Janet Reynolds To: duxuser@xxxxxxxxxxxxx Sent: Thursday, February 09, 2006 6:04 PM Subject: [duxuser] Re: Setting up more than one embosser This is a problem we also have here at RNZFB. We have three identical embossers, and as soon as you change to a different one the document embosser settings default to 44, 27. If anyone has a solution that would be wonderful. Janet -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Kathy Riessen Sent: Friday, 10 February 2006 11:59 a.m. To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Setting up more than one embosser We have just moved onto Duxbury from Megadots and as such purchased Duxbury 10.5 We have 2 embossers which are connected to our system and each is used as often as the other, depending on the type of material being produced. My dilemma is: When trying to set up the Global Embossers I can have both embossers listed as Brailler Devices, but seem to be able to only set the Desired Braille Document Formatting on one of them - this one becoming the embosser of choice for new documents. As soon as I try changing the settings on another one, that one reverts back to the suggested settings which are nothing like we use. This means that everytime I want to select the other embosser in my Document Setup, I have to manually put in the Desired Document Formatting for that embosser. Can I globally set up more than one embosser with our Standard Parameters, so that I can then select either one in the Document Setup without having to check whether or not the line width, number of lines, top margin etc are correct. Kathy -------------------------------------------------------------- Kathy Riessen, Braille Production Coordinator South Australian School for Vision Impaired 1B Duncan Avenue, Park Holme, SA 5043 Tel: 8277 5255, Fax: 8277 5051