The MIDI out on my ProjectMix triggers my VoiceLive 2, just fine. That would be a first good try, though. Maybe it doesn't have anything to do with the audio, but the MIDI. Bryan -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Gordon Kent Sent: Monday, July 05, 2010 1:59 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: sonar 8.53 and project mix latency. Are you using the project mix as your midi interface? I seem to remember there being a problem with the project mix's midi out. If you have something else to use as a midi interface, try it. GOrd ----- Original Message ----- From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, July 03, 2010 10:51 AM Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > Hi. well, I'm on the road from today until Friday night so it'll have > to wait. > > No, I haven't used another m audio card with this particular machine yet. > > Perhaps it is a driver or interface issue because the presonus and > motu interfaces worked fine. > > That is a good point about the driver... I'll hunt around for more > user experiences. > > Thanks, > > Cameron. > > > > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of D!J!X! > Sent: Saturday, July 03, 2010 2:35 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > > Hmm not sure then what could be the issue, it seems to be related to > the card and not the system... Maybe BSmart can help you on that end > since I believe he's got one of these units. Or somebody else who might have > 1... > BTW, I guess the last thing to check is driver versions, latest > doesn't always equal best, see if your driver version has caused > issues for anybody else... That all sounds kind of strange. Have you > tried uninstalling and reinstalling the drivers? Have you had any > other m-audio interface on that same machine/OS session before? > > HTH, D!J!X! > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of Cameron > Sent: Saturday, July 03, 2010 2:09 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > > Hi. ti firewire, yes, I've done all that... with this machine, I've > used two other firewire interfaces with no trouble. The project mix > won't let me select wdm. It just defaults back to the internal > soundcard when you try to change the driver mode in sonar. > > Thanks, > > Cameron. > > > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of D!J!X! > Sent: Saturday, July 03, 2010 1:55 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > > So have you tried wdm? Did this always happen on this machine, or did > it just start to happen? If this is a firewire unit, you've been > through all the steps, made sure you have a T.I card, disabled 1394 > networking under control panel>system>hardware>device manager>network > adapters etc? > > HTH, D!J!X! > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of Cameron > Sent: Saturday, July 03, 2010 1:04 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > > Hi. yes, already set to acio. And yes, if you play a synth on an > existing track, you get the same results. > > Thanks, > > Cameron. > > > > > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of D!J!X! > Sent: Saturday, July 03, 2010 12:47 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: sonar 8.53 and project mix latency. > > Have you tried switching driver modes from wdm to asio? You say that > this only happens when new synths are inserted? Meaning that if you > play synths from projects that you've already done, even if you > manually play those synths they work? Or do they also exhibit this latency? > > D!J!X! > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On > Behalf Of Cameron > Sent: Saturday, July 03, 2010 12:04 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] sonar 8.53 and project mix latency. > > Hi all. sort of going mental over here and need some tips. (win xp > pro sp3, intel I7 quad core, 3gb ram, sonar 8.53 producer.) > > Just setup my system the other day with my new m audio project mix, ct > for 8.5, the latest version of hsc, and some new rapture and dimension > packs I found etc. I thought I'd get totally up to date. > > Well, playback of projects is totally fine. I can load a project with > a dozen instances of soft synths plus audio tracks and it works like a > charm. > > However, when I insert a soft synth into a new project, say, one > instance of dimension pro or true pianos, there is about a one second > delay from when you hit a key to when you hear the note you played. > You can't even play a scale of quarter notes without it missing three > or four, no matter how slow you play. And fast runs or trills don't > get reproduced at all. > > I didn't have this issue with the firebox I was just using before I > switched to the project mix. For now I am set to record at 24 bit, > 44.1. the playback and recording buffer sizes are 256. I played with > them a bit but got no better latency. > > I am having this problem with stand alone instruments too. Like > Synthogy ivory. > > Any tips on what I could do to sort this out? > > Also, before anyone asks, yes I am using the external midi, all the > ins and outs are set correctly and the drivers are checked in Sonar, > and, I did a reset on the project mix in control panel. > > I've never seen latency this bad on an interface! There must be some > setting I haven't checked... > > Any help would be greatly appreciated. > > Thanks, > > Cameron. > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the > immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq