So have you tried wdm? Did this always happen on this machine, or did it
just start to happen? If this is a firewire unit, you've been through all
the steps, made sure you have a T.I card, disabled 1394 networking under
control panel>system>hardware>device manager>network adapters etc?
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Cameron
Sent: Saturday, July 03, 2010 1:04 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar 8.53 and project mix latency.
Hi. yes, already set to acio. And yes, if you play a synth on an
existing
track, you get the same results.
Thanks,
Cameron.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of D!J!X!
Sent: Saturday, July 03, 2010 12:47 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar 8.53 and project mix latency.
Have you tried switching driver modes from wdm to asio? You say that this
only happens when new synths are inserted? Meaning that if you play synths
from projects that you've already done, even if you manually play those
synths they work? Or do they also exhibit this latency?
D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Cameron
Sent: Saturday, July 03, 2010 12:04 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] sonar 8.53 and project mix latency.
Hi all. sort of going mental over here and need some tips. (win xp pro
sp3, intel I7 quad core, 3gb ram, sonar 8.53 producer.)
Just setup my system the other day with my new m audio project mix, ct for
8.5, the latest version of hsc, and some new rapture and dimension packs I
found etc. I thought I'd get totally up to date.
Well, playback of projects is totally fine. I can load a project with a
dozen instances of soft synths plus audio tracks and it works like a
charm.
However, when I insert a soft synth into a new project, say, one instance
of
dimension pro or true pianos, there is about a one second delay from when
you hit a key to when you hear the note you played. You can't even play a
scale of quarter notes without it missing three or four, no matter how
slow
you play. And fast runs or trills don't get reproduced at all.
I didn't have this issue with the firebox I was just using before I
switched
to the project mix. For now I am set to record at 24 bit, 44.1. the
playback and recording buffer sizes are 256. I played with them a bit but
got no better latency.
I am having this problem with stand alone instruments too. Like Synthogy
ivory.
Any tips on what I could do to sort this out?
Also, before anyone asks, yes I am using the external midi, all the ins
and
outs are set correctly and the drivers are checked in Sonar, and, I did a
reset on the project mix in control panel.
I've never seen latency this bad on an interface! There must be some
setting
I haven't checked...
Any help would be greatly appreciated.
Thanks,
Cameron.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
