[ddots-l] Re: Problems Sustaining Notes
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 27 Sep 2006 22:28:07 +0100
Hi,
There's the step recording mode. Haven't played with it for a while, but
this method of recording made a lot of folks a lot of money in the 80s
(giving away my age...).
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rosser
Sent: 27 September 2006 21:44
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems Sustaining Notes
Hi Tim, my name is Ross, I also am wanting to make use of the piano roll in
sonar 5. I see what you are saying about jaws not being accessible in the
piano roll window, I was wandering is there any other way of creating
bassline,synth patterns without using the piano roll. Obviously also without
using a keyboard or some instrument, I want to be able to do it myself on
the computer. thanks Ross
----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, September 24, 2006 8:05 PM
Subject: [ddots-l] Re: Problems Sustaining Notes
> Phil,
>
> The Piano Roll is a sort of half-way house between step record editing
> and editing using the Event View. It's a lot easier for a sighted
> person to see where notes line up to others at their start and end
> points when using this view, so it's really useful if you're preparing
> patterns, drum or otherwise, that you're intending to loop, as you can
> make note durations, etc, really tight without having to quantise.
>
> Must have another look at it myself to try and figure out how you
> could express its output in speech and/or Braille, but it certainly
> wouldn't be easy, though it would be great if we could make it possible.
>
> It's absolutely the right thing to do to define to a manufacturer why
> we need something to work then offer suggestions as to possible
> methods of making it happen.
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone: +44 (0)1827 719822
>
> Don't forget to vote for change at
> http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Phil Muir
> Sent: 24 September 2006 08:48
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Problems Sustaining Notes
>
> Hi Sean!!
>
> It's a view that's never been supported by CT. My guess is that, if
> it were scriptable then, David would have done it by now.
>
> I need to take a look at it again. Looked at it briefly however,
> still not entirely convinced that, it's a view that could be made
> really accessible in it's current state, ether with CT or, JSonar.
> For example, if you locate a MIDI note in there, pressing enter on it,
> won't allow you to alter the value.
>
> Also, the various values in the piano roll view, only spoke in JSonar,
> when I set the Jaws highlight to "Say All." Perhaps if we had a good
> understanding of what the piano roll view is used for then, we could
> present a good case to 12 tone, explaining why it doesn't work in it's
> current state, and what would be required to put it right.
>
> It would be worth you getting some of your eyes over there to take a
> look at it with you. That would probably confirm it for you.
>
> Regards, Phil Muir
>
> ----- Original Message -----
> From: "Sean A. Cummins" <Sean@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, September 23, 2006 5:16 PM
> Subject: [ddots-l] Re: Problems Sustaining Notes
>
>
>> Why is that Phil?!
>>
>> SeanA!
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
