[ddots-l] Re: Problems Sustaining Notes
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 29 Sep 2006 09:23:41 +0100
Phil,
It certainly was - don't remember seeing it in any Sonar release. Does
anybody know of a third-party equivalent?
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: 28 September 2006 14:03
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems Sustaining Notes
Think there used to be a vurtual piano a while back. Mind you, that may
have been in the days of Cakewalk.
Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, September 28, 2006 1:32 PM
Subject: [ddots-l] Re: Problems Sustaining Notes
> Hi,
>
> Just been reading up a bit on Sonar 5's step recording and yes, you do
> need
> a means of getting notes into the machine. There was a thread a little
> while ago about using the QWERTY keyboard as a note input device - does
> anybody have the details, please? If there is a method of doing this,
> then
> we have a complete step recording system with no MIDI controller or
> keyboard
> required.
>
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone: +44 (0)1827 719822
>
> Don't forget to vote for change at http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Sandy Licht
> Sent: 28 September 2006 00:18
> To: ddots-l@xxxxxxxxxxxxx; ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Problems Sustaining Notes
>
> Don't you have to use a midi controller of some kind to use step
> recording?
> In Sonar 5, step recording is definitely more user friendly than it was in
> Sonar 2.
>
> At 04:28 PM 9/27/2006, Tim Burgess wrote:
>>Hi,
>>
>>There's the step recording mode. Haven't played with it for a while,
>>but this method of recording made a lot of folks a lot of money in the
>>80s (giving away my age...).
>>
>>Best wishes.
>>
>>Tim Burgess
>>Raised Bar Ltd
>>Phone: +44 (0)1827 719822
>>
>>Don't forget to vote for change at
>>http://www.raisedbar.net/petition.htm
>>
>>-----Original Message-----
>>From: ddots-l-bounce@xxxxxxxxxxxxx
>>[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Rosser
>>Sent: 27 September 2006 21:44
>>To: ddots-l@xxxxxxxxxxxxx
>>Subject: [ddots-l] Re: Problems Sustaining Notes
>>
>>Hi Tim, my name is Ross, I also am wanting to make use of the piano
>>roll in sonar 5. I see what you are saying about jaws not being
>>accessible in the piano roll window, I was wandering is there any other
>>way of creating bassline,synth patterns without using the piano roll.
>>Obviously also without using a keyboard or some instrument, I want to
>>be able to do it myself on the computer. thanks Ross
>>----- Original Message -----
>>From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
>>To: <ddots-l@xxxxxxxxxxxxx>
>>Sent: Sunday, September 24, 2006 8:05 PM
>>Subject: [ddots-l] Re: Problems Sustaining Notes
>>
>>
>> > Phil,
>> >
>> > The Piano Roll is a sort of half-way house between step record
>> > editing and editing using the Event View. It's a lot easier for a
>> > sighted person to see where notes line up to others at their start
>> > and end points when using this view, so it's really useful if you're
>> > preparing patterns, drum or otherwise, that you're intending to
>> > loop, as you can make note durations, etc, really tight without having
> to quantise.
>> >
>> > Must have another look at it myself to try and figure out how you
>> > could express its output in speech and/or Braille, but it certainly
>> > wouldn't be easy, though it would be great if we could make it
>> > possible.
>> >
>> > It's absolutely the right thing to do to define to a manufacturer
>> > why we need something to work then offer suggestions as to possible
>> > methods of making it happen.
>> >
>> > Best wishes.
>> >
>> > Tim Burgess
>> > Raised Bar Ltd
>> > Phone: +44 (0)1827 719822
>> >
>> > Don't forget to vote for change at
>> > http://www.raisedbar.net/petition.htm
>> >
>> > -----Original Message-----
>> > From: ddots-l-bounce@xxxxxxxxxxxxx
>> > [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> > On
>> > Behalf Of Phil Muir
>> > Sent: 24 September 2006 08:48
>> > To: ddots-l@xxxxxxxxxxxxx
>> > Subject: [ddots-l] Re: Problems Sustaining Notes
>> >
>> > Hi Sean!!
>> >
>> > It's a view that's never been supported by CT. My guess is that, if
>> > it were scriptable then, David would have done it by now.
>> >
>> > I need to take a look at it again. Looked at it briefly however,
>> > still not entirely convinced that, it's a view that could be made
>> > really accessible in it's current state, ether with CT or, JSonar.
>> > For example, if you locate a MIDI note in there, pressing enter on
>> > it, won't allow you to alter the value.
>> >
>> > Also, the various values in the piano roll view, only spoke in
>> > JSonar, when I set the Jaws highlight to "Say All." Perhaps if we
>> > had a good understanding of what the piano roll view is used for
>> > then, we could present a good case to 12 tone, explaining why it
>> > doesn't work in it's current state, and what would be required to put
>> > it
> right.
>> >
>> > It would be worth you getting some of your eyes over there to take a
>> > look at it with you. That would probably confirm it for you.
>> >
>> > Regards, Phil Muir
>> >
>> > ----- Original Message -----
>> > From: "Sean A. Cummins" <Sean@xxxxxxxxxxxxx>
>> > To: <ddots-l@xxxxxxxxxxxxx>
>> > Sent: Saturday, September 23, 2006 5:16 PM
>> > Subject: [ddots-l] Re: Problems Sustaining Notes
>> >
>> >
>> >> Why is that Phil?!
>> >>
>> >> SeanA!
>> >>
>> >> ** To leave the list, click on the immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >> ** If this link doesn't work then send a message to:
>> >> ** ddots-l-request@xxxxxxxxxxxxx
>> >> ** and in the Subject line type
>> >> ** unsubscribe
>> >> ** For other list commands such as vacation mode, click on the
>> >> ** immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >> Subject:- faq
>> >>
>> >>
>> >
>> > ** To leave the list, click on the immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> > ** If this link doesn't work then send a message to:
>> > ** ddots-l-request@xxxxxxxxxxxxx
>> > ** and in the Subject line type
>> > ** unsubscribe
>> > ** For other list commands such as vacation mode, click on the
>> > ** immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> > ** or send a message, to
>> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> > ** To leave the list, click on the immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> > ** If this link doesn't work then send a message to:
>> > ** ddots-l-request@xxxxxxxxxxxxx
>> > ** and in the Subject line type
>> > ** unsubscribe
>> > ** For other list commands such as vacation mode, click on the
>> > ** immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> > ** or send a message, to
>> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> >
>>
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** ddots-l-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** ddots-l-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.407 / Virus Database: 268.12.9/457 - Release Date:
>>9/26/2006
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
